參數資料
型號: MB91151APMC-G
廠商: FUJITSU LTD
元件分類: 微控制器/微處理器
英文描述: RISC MICROCONTROLLER, PQFP144
封裝: 20 X 20 MM, 1.70 MM HEIGHT, 0.50 MM PITCH, PLASTIC, LFQFP-144
文件頁數: 7/96頁
文件大?。?/td> 2300K
代理商: MB91151APMC-G
MB91151A Series
DS07-16312-2E
15
The following figure shows an example usage of an external clock.
An example usage of an external clock
Note on During Operation of PLL Clock Mode
If the PLL clock mode is selected, the microcontroller attempts to be working with the self-oscillating circuit
even when there is no external oscillator or external clock input is stopped. Performance of this operation,
however, cannot be guaranteed.
Watchdog Timer Function
The watchdog timer supported by the FR family monitors the program that performs the reset delay operation
for a specified time. If the program hangs and the reset delay operation is not performed, the watchdog timer
resets the CPU. Therefore, once the watchdog timer is enabled, operation continues until the CPU is reset.
As an exception, a reset delay automatically occurs if the CPU stops program execution. For the conditions
that apply to this exception, refer to "3.12.8 Watchdog Function" in "MB91151A Series HARDWARE MANUAL".
4.
Caution During Powering Up
When powering up
When turning on the power supply, never fail to start from setting the RST pin to “L” level. And after the power
supply voltage goes to VCC level, at least after ensuring the time for 5 machine cycles, then set to “H” level.
Source oscillation input
At turning on the power supply, never fail to input the clock before cancellation of the oscillation stabilizing
waiting.
Power on resetting
When powering up or when turning the power back on after the supply voltage drops below the operation
assurance range, be sure to reset the power.
Power on sequence
Turn on the power in the order of VCC, AVCC and AVRH. The power should be disconnected in inverse order.
Even when an A/D converter is not in use, connect AVCC to the VCC level and AVSS to the VSS level.
Even when a D/A converter is not in use, connect DAVC to the VCC level and DAVS to the VSS level.
X0
X1
MB91151A series
相關PDF資料
PDF描述
MB91233LPFF-G-XXX 32-BIT, MROM, 33.6 MHz, RISC MICROCONTROLLER, PQFP120
MB91340PMT 32-BIT, MROM, 66 MHz, RISC MICROCONTROLLER, PQFP176
MB91605PMC 32-BIT, MROM, 80 MHz, RISC MICROCONTROLLER, PQFP176
MB91F158PMC1 RISC MICROCONTROLLER, PQFP120
MB91F233APFF-GE1 32-BIT, FLASH, 33.6 MHz, RISC MICROCONTROLLER, PQFP120
相關代理商/技術參數
參數描述
MB91151APMT2-G 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:32-bit Proprietary Microcontrollers
MB91154 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:32-bit Proprietary Microcontrollers
MB91154PFV-G 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:32-bit Proprietary Microcontrollers
MB91154PFV-G-XXX 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:32-bit Proprietary Microcontrollers
MB91155 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:32-bit Proprietary Microcontrollers