參數資料
型號： M37733MHBXXXFP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP80
封裝： 14 X 20 MM, 0.80 MM PITCH, PLASTIC, QFP-80
文件頁數： 48/92頁
文件大?。?/td> 1725K
代理商： M37733MHBXXXFP
49
MITSUBISHI MICROCOMPUTERS
M37733MHBXXXFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
PRELIMINARY
Notice:
This
is not
a final
specification.
Some
parametric
limits
are
subject
to change.
PROCESSOR MODE
Bits 0 and 1 of processor mode register 0 shown in Figure 57 are
used to select any mode of the single-chip mode, the memory
expansion mode, the microprocessor mode and the evaluation mode.
Ports P0 to P3 and a part of port P4 are used as I/O pins of address,
data, and control signals except for in the single-chip mode.
Figure 58 shows the functions of ports P0 to P4 in each mode.
The external memory area changes when the mode changes.
Figure 59 shows the memory map for each mode. Refer to Figure 1
for the addresses of RAM and ROM. The external memory area can
be accessed except in the single-chip mode. The accessing of the
external memory is affected by the BYTE pin, the wait bit (bit 2 of the
processor mode register 0), and the wait selection bit (bit 0 of the
processor mode register 1). These will be described next.
BYTE pin
When accessing the external memory, the level of the BYTE pin is
used to determine whether to use the data bus as 8-bit width or 16-
bit width.
The data bus has a width of 8 bits when level of the BYTE pin is “H”,
and port P2 becomes the data I/O pin.
The data bus has a width of 16 bits when the level of the BYTE pin is
“L”, and ports P1 and P2 become the data I/O pins.
When accessing the internal memory, the data bus always has a
width of 16 bits regardless of the BYTE pin level.
Fig. 57 Processor mode register bit configuration
Clock
φ 1 output selection bit
0 : No
φ 1 output
1 :
φ 1 output
Processor mode bit
0 0 : Single-chip mode
0 1 : Memory expansion mode
1 0 : Microprocessor mode
1 1 : Evaluation mode
Wait bit
0 : Wait
1 : No Wait
Software reset bit
Reset occurs when this bit is set to “1”
Interrupt priority detection time selection bit
0 0 : Internal clock
φ ! 7 (cycle)
0 1 : Internal clock
φ ! 4 (cycle)
1 0 : Internal clock
φ ! 2 (cycle)
Test mode bit
This bit must be "0"
76 5 43 2
0
1
0
Processor mode register 0
Address
5E16
Address
5F16
Processor mode register 1
Wait selection bit
0 : Wait 0
1 : Wait 1
765 432
0
1
相關PDF資料
PDF描述
M37733S4LHP 16-BIT, 12 MHz, MICROCONTROLLER, PQFP80
M37734M8LXXXHP 16-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80
M37735M4BXXXFP 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP80
M37735MHBXXXFP 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP80
M37735MHLXXXHP 16-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80
相關代理商/技術參數
參數描述
M37733MHL 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37733MHLXXXHP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37733S4 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:16-BIT CMOS MICROCOMPUTER
M37733S4BFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
M37733S4LHP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*