參數資料
型號： M37733MHBXXXFP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP80
封裝： 14 X 20 MM, 0.80 MM PITCH, PLASTIC, QFP-80
文件頁數： 25/92頁
文件大?。?/td> 1725K
代理商： M37733MHBXXXFP
28
MITSUBISHI MICROCOMPUTERS
M37733MHBXXXFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
PRELIMINARY
Notice:
This
is not
a final
specification.
Some
parametric
limits
are
subject
to change.
When timer Bi is read, the contents of the reload register is read.
Note that, in this mode, the interval from the fall of the TBiIN pin input
signal to the next rise or from the rise to the next fall must be at least
two cycles of the timer count source.
Timer Bi overflow flag which is bit 5 of the timer Bi mode register is
set to “1” when the timer Bi counter reaches 000016. This flag is cleared
by writing to the corresponding timer Bi mode register. By reading
this flag, the reason why the interrupt request signal is generated,
which is the completion of measurement or the counter overflow, can
be detected. An interrupt request signal may occur because the
counter value is particularly undefined just after counting starts.
Accordingly, make sure to detect the occurrence reason of an interrupt
request signal with the timer Bi overflow flag. This flag is “1” at reset.
When using timer B2 as the clock timer and using timer B1 in the
internal connect mode, functions in this mode are lost.
Fig. 32 Timer Bi mode register bit configuration during pulse period
measurement/pulse width measurement mode
Fig. 33 Pulse period measurement mode operation (example of measuring the interval from the falling edge to next falling one)
Selected clock
source fi
TBiIN
Reload register
←Counter
Counter
←0
Count start flag
Interrupt request signal
76
54
32
10
0
1
0
1 0 : Always “10” in pulse period
measurement/pulse width
measurement mode
0 0 : Count from the falling edge of
input signal to the next falling one
0 1 : Count from the rising edge of
input signal to the next rising one
1 0 : Count from the falling edge of input
signal to the next rising one
and from the rising edge to the
next falling one
0 : Always “0” in pulse period
measurement/pulse width
measurement mode (timer B0)
! : Not used in pulse period
measurement/pulse width
measurement mode
(timers B1, B2)
Timer Bi overflow flag
Clock source selection bit
0 0 : Select f2
0 1 : Select f16
1 1 : Select f512
1 0 : Select f64
Timer B0 mode register 5B16
Timer B2 mode register 5D16
Timer B1 mode register 5C16
Addresses
相關PDF資料
PDF描述
M37733S4LHP 16-BIT, 12 MHz, MICROCONTROLLER, PQFP80
M37734M8LXXXHP 16-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80
M37735M4BXXXFP 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP80
M37735MHBXXXFP 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP80
M37735MHLXXXHP 16-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80
相關代理商/技術參數
參數描述
M37733MHL 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37733MHLXXXHP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M37733S4 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:16-BIT CMOS MICROCOMPUTER
M37733S4BFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
M37733S4LHP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*