參數資料
型號: M30218MFCFP
元件分類: 微控制器/微處理器
英文描述: 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP100
封裝: PLASTIC, QFP-100
文件頁數: 10/161頁
文件大小: 2043K
代理商: M30218MFCFP
107
Under
development
Tentative Specifications REV.A
Specifications in this manual are tentative and subject to change.
Mitsubishi microcomputers
M30218 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Serial I/O2
Figure GA-5. Automatic Transfer Serial I/O Operation
004FF16
Automatic transfer RAM
Transfer counter
Automatic transfer
data pointer
Serial I/O2 register
0045216
0045116
0045016
0044F16
0044E16
0040016
0416
5216
SIN2
SOUT2
When the internal synchronous clock is selected, automatic serial transfer starts by writing 1 less than
the number of transfer bytes to the transfer counter (address 034616). When an external sync clock is
selected, automatic serial transfer starts by writing 1 less than the number of transfer bytes to the
transfer counter and the transfer clock is input. In this case, allow for at least 5 cycles of internal
system clock before the transfer clock is input after writing to the transfer counter.
Also, for data to data transfer intervals, allow at least 5 cycles of internal system clock reckoning from
a rise of clock at the last bit of one-byte data.
Regardless of whether the internal or external synchronous clock is selected, the automatic transfer
data pointer and the transfer counter are decreased after each 1-byte data is received and then written
into the automatic transfer RAM. The serial transfer status flag (bit5 of address 034416) is set to “1” by
writing data into the transfer counter. The serial transfer status flag is reset to “0” after the last data is
written into the automatic transfer RAM. At the same time, a serial I/O2 interrupt request occurs.
The values written in the automatic transfer data pointer (address 034016) and the automatic transfer
interval set bits (bit 0 to bit 4 of address 034816) are held in the latch.
When data is written into the transfer counter, the values latched in the automatic transfer data pointer
(address 034016) and the automatic transfer interval set bits (bit 0 to bit 4) are transferred to the
decrement counter.
相關PDF資料
PDF描述
M30220FCRP 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP144
M30220MA-XXXGP 16-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP144
M30220MA-XXXRP 16-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP144
M30220FCRP 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP144
M30220FCGP 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP144
相關代理商/技術參數
參數描述
M3021E8F2-AXXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M3021E8F4-AXXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M3021E8F6-AXXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M3021E8F8-AXXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M3021E8FA-AXXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER