參數資料
型號： LTC2481CDD#PBF
廠商： Linear Technology
文件頁數： 22/40頁
文件大?。?/td> 0K
描述： IC ADC 16BIT I2C 10-DFN
標準包裝： 121
位數： 16
采樣率（每秒）： 7.5
數據接口： I²C，串行，SPI?
轉換器數目： 1
功率耗散（最大）： 480µW
電壓電源： 單電源
工作溫度： 0°C ~ 70°C
安裝類型： 表面貼裝
封裝/外殼： 10-WFDFN 裸露焊盤
供應商設備封裝： 10-DFN（3x3）
包裝： 管件
輸入數目和類型： 2 個單端，雙極；1 個差分，雙極
產品目錄頁面： 1348 (CN2011-ZH PDF)
配用： DC951A-ND - BOARD DELTA SIGMA ADC LTC2481
LTC2481
29
2481fc
APPLICATIONS INFORMATION
high bandwidth (at least 500kHz) necessary to drive the
input switched-capacitor network. A possible solution is
a high gain, low bandwidth amplier stage followed by a
high bandwidth unity-gain buffer.
When external ampliers are driving the LTC2481, the
ADC input referred system noise calculation can be
simplied by Figure 30. The noise of an amplier driving
the LTC2481 input pin can be modeled as a band limited
white noise source. Its bandwidth can be approximated
by the bandwidth of a single pole lowpass lter with a
corner frequency fi. The amplier noise spectral density
is ni. From Figure 30, using fi as the x-axis selector, we
can nd on the y-axis the noise equivalent bandwidth freqi
of the input driving amplier. This bandwidth includes
the band limiting effects of the ADC internal calibration
and ltering. The noise of the driving amplier referred
to the converter input and including all these effects can
be calculated as N = ni √freqi. The total system noise
(referred to the LTC2481 input) can now be obtained by
summing as square root of sum of squares the three
ADC input referred noise sources: the LTC2481 internal
noise, the noise of the IN+ driving amplier and the noise
of the IN– driving amplier.
If the CA0/f0 pin is driven by an external oscillator of
frequency fEOSC, Figure 30 can still be used for noise
calculation if the x-axis is scaled by fEOSC/307200.
DIFFERENTIAL INPUT SIGNAL FREQUENCY (Hz)
0fS 2fS 3fS 4fS 5fS 6fS 7fS 8fS 9fS10fS11fS12fS
INPUT
NORMAL
MODE
REJECTION
(dB)
2481 F31
0
–10
–20
–30
–40
–50
–60
–70
–80
–90
–100
–110
–120
For large values of the ratio fEOSC/307200, the Figure 30
plot accuracy begins to decrease, but at the same time
the LTC2481 noise oor rises and the noise contribution
of the driving ampliers lose signicance.
Normal Mode Rejection and Antialiasing
One of the advantages delta-sigma ADCs offer over
conventional ADCs is on-chip digital ltering. Combined
with a large oversampling ratio, the LTC2481 signicantly
simplies antialiasing lter requirements. Additionally,
the input current cancellation feature of the LTC2481
allows external lowpass ltering without degrading the
DC performance of the device.
The SINC4 digital lter provides greater than 120dB normal
mode rejection at all frequencies except DC and integer
multiples of the modulator sampling frequency (fS). The
LTC2481’s autocalibration circuits further simplify the
antialiasing requirements by additional normal mode
signal ltering both in the analog and digital domain.
Independent of the operating mode, fS = 256 fN = 2048
fOUTMAX where fN is the notch frequency and fOUTMAX
is the maximum output data rate. In the internal oscilla-
tor mode with a 50Hz notch setting, fS = 12800Hz, with
50Hz/60Hz rejection, fS = 13960Hz and with a 60Hz notch
setting fS = 15360Hz. In the external oscillator mode, fS =
fEOSC/20. The performance of the normal mode rejection
is shown in Figures 31 and 32.
Figure 31. Input Normal Mode Rejection,
Internal Oscillator and 50Hz Notch Mode
Figure 32. Input Normal Mode Rejection at DC
DIFFERENTIAL INPUT SIGNAL FREQUENCY (Hz)
0fS
INPUT
NORMAL
MODE
REJECTION
(dB)
2481 F32
0
–10
–20
–30
–40
–50
–60
–70
–80
–90
–100
–110
–120
2fS 3fS 4fS 5fS 6fS 7fS 8fS 9fS 10fS
相關PDF資料
PDF描述
ISL83082EIBZ IC TXRX RS485/422 5V ESD 8SOIC
ISL3175EIUZ TXRX ESD 3.3V RS-485/422 8-MSOP
ISL3176EIBZ TXRX ESD 3.3V RS-485/422 14-SOIC
ISL3172EIUZ TXRX ESD 3.3V RS-485/422 8-MSOP
AD7477ARTZ-500RL7 IC ADC 10BIT 1MSPS SOT23-6
相關代理商/技術參數
參數描述
LTC2481HDD#PBF 功能描述:IC ADC 16BIT I2C 7.5SPS 10DFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2481HDD#TRPBF 功能描述:IC ADC DELTA SIGMA 16BIT 10DFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2481IDD#PBF 功能描述:IC ADC 16BIT I2C 10-DFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 其它有關文件:TSA1204 View All Specifications 標準包裝:1 系列:- 位數:12 采樣率（每秒）:20M 數據接口:并聯 轉換器數目:2 功率耗散（最大）:155mW 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:Digi-Reel® 輸入數目和類型:4 個單端，單極；2 個差分，單極 產品目錄頁面:1156 (CN2011-ZH PDF) 其它名稱:497-5435-6
LTC2481IDD#TRPBF 功能描述:IC ADC 16BIT I2C 10-DFN RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494
LTC2482CDD 制造商:Linear Technology 功能描述:ADC Single Delta-Sigma 6.8sps 16-bit Serial 10-Pin DFN EP
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*