參數資料
型號： LAN91C110TQFP
廠商： STANDARD MICROSYSTEMS CORP
元件分類： 微控制器/微處理器
英文描述： FEAST FAST ETHERNET CONTROLLER FOR PCMCIA AND GENERIC 16-BIT APPLICATIONS
中文描述： 4 CHANNEL(S), 100M bps, LOCAL AREA NETWORK CONTROLLER, PQFP144
封裝： TQFP-144
文件頁數： 36/55頁
文件大?。?/td> 482K
代理商： LAN91C110TQFP
FEAST Fast Ethernet Controller
for PCMCIA and Generic 16-Bit Applications
SMSC DS – LAN91C110 REV. B
Page 36
Rev. 09/05/02
Typical Flow of Events for Transmit (Auto Release = 0)
S/W DRIVER
MAC SIDE
1 ISSUE ALLOCATE MEMORY FOR TX - N
BYTES - the MMU attempts to allocate N bytes
of RAM.
2 WAIT FOR SUCCESSFUL COMPLETION
CODE - Poll until the ALLOC INT bit is set or
enable its mask bit and wait for the interrupt.
The TX packet number is now at the Allocation
Result Register.
3 LOAD TRANSMIT DATA - Copy the TX packet
number into the Packet Number Register. Write
the Pointer Register, then use a block move
operation from the upper layer transmit queue
into the Data Register.
4 ISSUE "ENQUEUE PACKET NUMBER TO TX
FIFO" - This command writes the number
present in the Packet Number Register into the
TX FIFO. The transmission is now enqueued.
No further CPU intervention is needed until a
transmit interrupt is generated.
5
The enqueued packet will be transferred to the
MAC block as a function of TXENA (nTCR) bit
and of the deferral process (1/2 duplex mode
only) state.
6
a) Upon transmit completion the first word in
memory is written with the status word. The
packet number is moved from the TX FIFO into
the TX completion FIFO. Interrupt is generated
by the TX completion FIFO being not empty.
b) If a TX failure occurs on any packets, TX INT
is generated and TXENA is cleared,
transmission sequence stops. The packet
number of the failure packet is presented at the
TX FIFO PORTS Register.
7 a) SERVICE INTERRUPT - Read Interrupt Status
Register. If it is a transmit interrupt, read the TX
FIFO Packet Number from the FIFO Ports
Register. Write the packet number into the Packet
Number Register. The corresponding status word
is now readable from memory. If status word
shows successful transmission, issue RELEASE
packet number command to free up the memory
used by this packet. Remove packet number
from completion FIFO by writing TX INT
Acknowledge Register.
b) Option 1) Release the packet.
Option 2) Check the transmit status in the EPH
STATUS Register, write the packet number of
the current packet to the Packet Number
Register, re-enable TXENA, then go to step 4 to
start the TX sequence again.
相關PDF資料
PDF描述
LAN91C96I NON-PCI SINGLE-CHIP FULL DUPLES ETHERNET CONTROLLER
LAN91C96I-MS NON-PCI SINGLE-CHIP FULL DUPLES ETHERNET CONTROLLER
LAN91C96I-MU NON-PCI SINGLE-CHIP FULL DUPLES ETHERNET CONTROLLER
LAN91C96IQFP NON-PCI SINGLE-CHIP FULL DUPLES ETHERNET CONTROLLER
LAN91C96ITQFP NON-PCI SINGLE-CHIP FULL DUPLES ETHERNET CONTROLLER
相關代理商/技術參數
參數描述
LAN91C110-TQFP 制造商:SMSC 功能描述:
LAN91C111 制造商:SMSC 制造商全稱:SMSC 功能描述:10/100 Non-PCI Ethernet Single Chip MAC + PHY
LAN91C111I-NC 功能描述:以太網 IC Non-PCI 10/100 Ethernet MAC RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
LAN91C111INE 制造商:SMSC 功能描述:NEW
LAN91C111I-NE 功能描述:以太網 IC Non-PCI 10/100 Ethernet MAC RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*