參數資料
型號： ISP1160BM
廠商： NXP SEMICONDUCTORS
元件分類： 總線控制器
英文描述： Embedded Universal Serial Bus Host Controller
中文描述： UNIVERSAL SERIAL BUS CONTROLLER, PQFP64
封裝： 7 X 7 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-414-1, LQFP-64
文件頁數： 19/88頁
文件大?。?/td> 2044K
代理商： ISP1160BM
Philips Semiconductors
ISP1160
Embedded USB Host Controller
Product data
Rev. 04 — 04 July 2003
19 of 88
9397 750 11371
Koninklijke Philips Electronics N.V. 2003. All rights reserved.
5.
Prepare PTD data in
μ
P system RAM
The communication between the HCD and the ISP1160 HC is in the form of
Philips Transfer Descriptor (PTD) data. The PTD data provides USB traffic
information about the commands, status and USB data packets.
The physical storage media of PTD data for the HCD is the microprocessor’s
system RAM. For the ISP1160’s HC, the storage media is the internal FIFO buffer
RAM.
The HCD prepares PTD data in the microprocessor’s system RAM for transfer to
the ISP1160’s HC internal FIFO buffer RAM.
6.
Transfer PTD data into HC’s FIFO buffer RAM
When PTD data is ready in the microprocessor’s system RAM, the HCD must
transfer the PTD data from the microprocessor’s system RAM into the ISP1160’s
internal FIFO buffer RAM.
7.
HC interprets PTD data
The HC determines what USB transactions are required based on the PTD data
that has been transferred into the internal FIFO buffer RAM.
8.
HC performs USB transactions via USB bus interface
The HC performs the USB transactions with the specified USB device endpoint
through the USB bus interface.
9.
HC informs HCD of the USB traffic results
The USB transaction status and the feedback from the specified USB device
endpoint will be put back into the ISP1160’s HC internal FIFO buffer RAM in PTD
data format. The HCD can read back the PTD data from the internal FIFO buffer
RAM.
9.3 PTD data structure
The Philips Transfer Descriptor (PTD) data structure provides communication
between the HCD and the ISP1160’s USB HC. The PTD data contains information
required by the USB traffic. PTD data consists of a PTD followed by its payload data,
as shown in
Figure 16
.
Fig 16. PTD data in FIFO buffer RAM.
MGT949
PTD
FIFO buffer RAM
payload data
PTD data #1
PTD
payload data
payload data
PTD
PTD data #2
PTD data #N
top
bottom
相關PDF資料
PDF描述
ISP1161A Full-speed Universal Serial Bus single-chip host and device controller
ISP1161ABD Full-speed Universal Serial Bus single-chip host and device controller
ISP1161ABM Full-speed Universal Serial Bus single-chip host and device controller
ISP1161 Full-speed Universal Serial Bus single-chip host and device controller
ISP1161A1 Universal Serial Bus single-chip host and device controller
相關代理商/技術參數
參數描述
ISP1160BM,557 功能描述:USB 接口集成電路 USB 1.1 HOST CONTROLLER RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1160BM/01 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Embedded Universal Serial Bus Host Controller
ISP1160BM/01,118 功能描述:USB 接口集成電路 USB HOST CTRL RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1160BM/01,151 功能描述:USB 接口集成電路 DO NOT USE ORDER -T OR NO "-" RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
ISP1160BM/01,157 功能描述:USB 接口集成電路 USB FULL SPEED HOST RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*