參數資料
型號: GS82032AGQ-133IT
廠商: GSI TECHNOLOGY
元件分類: SRAM
英文描述: 64K X 32 CACHE SRAM, 10 ns, PQFP100
封裝: QFP-100
文件頁數: 1/23頁
文件大?。?/td> 677K
代理商: GS82032AGQ-133IT
Rev: 1.09 7/2002
1/23
2000, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT/Q-180/166/133/100
64K x 32
2M Synchronous Burst SRAM
180 MHz–100 MHz
8 ns–12 ns
3.3 V VDD
3.3 V and 2.5 V I/O
TQFP, QFP
Commercial Temp
Industrial Temp
Features
FT pin for user-configurable flow through or pipelined
operation
Single Cycle Deselect (SCD) operation
3.3 V +10%/–5% core power supply
2.5 V or 3.3 V I/O supply
LBO pin for Linear or Interleaved Burst mode
Internal input resistors on mode pins allow floating mode pins
Default to Interleaved Pipelined mode
Byte Write (BW) and/or Global Write (GW) operation
Common data inputs and data outputs
Clock Control, registered, address, data, and control
Internal self-timed write cycle
Automatic power-down for portable applications
JEDEC standard 100-lead TQFP or QFP package
Functional Description
Applications
The GS82032A is a 2,097,152-bit high performance
synchronous SRAM with a 2-bit burst address counter.
Although of a type originally developed for Level 2 Cache
applications supporting high performance CPUs, the device
now finds application in synchronous SRAM applications,
ranging from DSP main store to networking chip set support.
Controls
Addresses, data I/Os, chip enables (E1, E2, E3), address burst
control inputs (ADSP, ADSC, ADV), and write control inputs
(Bx, BW, GW) are synchronous and are controlled by a
positive-edge-triggered clock input (CK). Output enable (G)
and power down control (ZZ) are asynchronous inputs. Burst
cycles can be initiated with either ADSP or ADSC inputs. In
Burst mode, subsequent burst addresses are generated
internally and are controlled by ADV. The burst address
counter may be configured to count in either linear or
interleave order with the Linear Burst Order (LBO) input. The
Burst function need not be used. New addresses can be loaded
on every cycle with no degradation of chip performance.
Flow Through/Pipeline Reads
The function of the Data Output Register can be controlled by
the user via the FT mode pin (Pin 14 in the TQFP). Holding
the FT mode pin low places the RAM in Flow Through mode,
causing output data to bypass the Data Output Register.
Holding FT high places the RAM in Pipelined mode, activating
the rising-edge-triggered Data Output Register.
SCD Pipelined Reads
The GS82032A is an SCD (Single Cycle Deselect) pipelined
synchronous SRAM. DCD (Dual Cycle Deselect) versions are
also available. SCD SRAMs pipeline deselect commands one
stage less than read commands. SCD RAMs begin turning off
their outputs immediately after the deselect command has been
captured in the input registers.
Byte Write and Global Write
Byte write operation is performed by using Byte Write enable
(BW) input combined with one or more individual byte write
signals (Bx). In addition, Global Write (GW) is available for
writing all bytes at one time, regardless of the Byte Write
control inputs.
Sleep Mode
Low power (Sleep mode) is attained through the assertion
(High) of the ZZ signal, or by stopping the clock (CK).
Memory data is retained during Sleep mode.
Core and Interface Voltages
The GS82032A operates on a 3.3 V power supply and all
inputs/outputs are 3.3 V- and 2.5 V-compatible. Separate
output power (VDDQ) pins are used to decouple output noise
from the internal circuit.
-180
-166
-133
-100
Pipeline
3-1-1-1
tCycle
tKQ
IDD
5.5 ns
3.2 ns
155 mA
6 ns
3.5 ns
140 mA
7.5 ns
4 ns
115 mA
10 ns
5 ns
90 mA
Flow
Through
2-1-1-1
tCycle
tKQ
IDD
9.1 ns
8 ns
100 mA
10 ns
8.5 ns
90 mA
12 ns
10 ns
80 mA
15 ns
12 ns
65 mA
相關PDF資料
PDF描述
GS8321EV18GE-133T 2M X 18 CACHE SRAM, 8.5 ns, PBGA165
GS8321ZV36E-150T 1M X 36 ZBT SRAM, 8.5 ns, PBGA165
GS832236AB-300T 1M X 36 CACHE SRAM, PBGA119
GS832472GC-150I 512K X 72 CACHE SRAM, 10 ns, PBGA209
GS832472GC-250T 512K X 72 CACHE SRAM, 6 ns, PBGA209
相關代理商/技術參數
參數描述
GS82032AGQ-150I 制造商:GSI Technology 功能描述:2MB (64K X 32) SYNCH BURST SCD - Trays
GS82032AGQ-166 制造商:GSI Technology 功能描述:2MB (64K X 32) SYNCH BURST SCD - Trays
GS82032AGQ-166I 制造商:GSI Technology 功能描述:2MB (64K X 32) SYNCH BURST SCD - Trays
GS82032AGQ-4 制造商:GSI Technology 功能描述:2MB (64K X 32) SYNCH BURST SCD - Trays
GS82032AGQ-4I 制造商:GSI Technology 功能描述:2MB (64K X 32) SYNCH BURST SCD - Trays