參數資料
型號： EVAL-AD7731EBZ
廠商： Analog Devices Inc
文件頁數： 14/44頁
文件大?。?/td> 0K
描述： BOARD EVALUATION FOR AD7731
標準包裝： 1
ADC 的數量： 1
位數： 24
采樣率（每秒）： 6.4k
數據接口： 串行
輸入范圍： ±1.28 V
在以下條件下的電源（標準）： 67.5mW @ 6.4kSPS
工作溫度： -40°C ~ 85°C
已用 IC / 零件： AD7731
已供物品： 板，CD
相關產品： AD7731BNZ-ND - IC ADC 24BIT SIGMA-DELTA 24DIP
AD7731BRUZ-REEL7-ND - IC ADC 24BIT SIGMA-DELTA 24TSSOP
AD7731BRUZ-REEL-ND - IC ADC 24BIT SIGMA-DELTA 24TSSOP
AD7731BRUZ-ND - IC ADC 24BIT SIGMA-DELTA 24TSSOP
AD7731BRZ-REEL7-ND - IC ADC 24BIT SIGMA-DELTA 24-SOIC
AD7731BRZ-REEL-ND - IC ADC 24BIT SIGMA-DELTA 24-SOIC
AD7731BRZ-ND - IC ADC 24BIT SIGMA-DELTA 24-SOIC
AD7731BRU-REEL7-ND - IC ADC 24BIT SIGMA-DELTA 24TSSOP
AD7731BRU-ND - IC ADC 24BIT SIGMA-DELTA 24TSSOP
AD7731BR-REEL7-ND - IC ADC 24BIT SIGMA-DELTA 24-SOIC
更多...
AD7731
–21–
REV. 0
CALIBRATION OPERATION SUMMARY
The AD7731 contains a number of calibration options as outlined previously. Table XVI summarizes the calibration types, the op-
erations involved and the duration of the operations. There are two methods of determining the end of calibration. The first is to
monitor the hardware
RDY pin using either interrupt-driven or polling routines. The second method is to do a software poll of the
RDY bit in the Status Register. This can be achieved by setting up the part for continuous reads of the Status Register once a calibra-
tion has been initiated. The
RDY pin and RDY bit go high on initiating a calibration and return low at the end of the calibration
routine. At this time, the MD2, MD1, MD0 bits of the Mode Register have returned to 0, 0, 0. The FAST and SKIP bits are treated
as 0 for the calibration sequence so the full filter is always used for the calibration routines. See Calibration section for full details.
Table XVI. Calibration Operations
MD2, MD1, Duration to
RDY Duration to RDY
Calibration Type
MD0
Low (CHP = 1)
Low (CHP = 0)
Calibration Sequence
Internal Zero-Scale
1, 0, 0
22
× 1/Output Rate 24 × 1/Output Rate Calibration on internal shorted input with PGA set
for selected input range. The Offset Calibration
Register for the selected channel is updated at the
end of this calibration sequence. For full self-cali-
bration, this calibration should be preceded by an
Internal Full-Scale calibration. For applications
which require an Internal Zero-Scale and System
Full Scale calibration, this Internal Zero-Scale
calibration should be performed first.
Internal Full-Scale
1, 0, 1
44
× 1/Output Rate 48 × 1/Output Rate Calibration on internally-generated input full-scale
with PGA set for selected input range. The Gain
Calibration Register for the selected channel is
updated at the end of this calibration sequence. It is
recommended that internal full-scale calibrations
are performed on the operating input range except
for the 20 mV and 40 mV input ranges where opti-
mum results are achieved by calibrating on the
80 mV range. This calibration should be followed
by either an Internal Zero-Scale or System Zero-
Scale calibration. This calibration should be fol-
lowed by either an Internal Zero-Scale or System
Zero-Scale calibration. This zero-scale calibration
should be performed at the operating input range.
System Zero-Scale
1, 1, 0
22
× 1/Output Rate 24 × 1/Output Rate Calibration on externally-applied input voltage with
PGA set for selected input range. The input applied
is assumed to be the zero-scale of the system. For
full system calibration, this System Zero-Scale
calibration should be performed first. For applica-
tions which require a System Zero-Scale and Inter-
nal Full Scale calibration, this calibration should be
preceded by the Internal Full-Scale calibration. The
Offset Calibration Register for the selected channel
is updated at the end of this calibration sequence.
System Full-Scale
1, 1, 1
22
× 1/Output Rate 24 × 1/Output Rate Calibration on externally-applied input voltage with
PGA set for selected input range. The input applied
is assumed to be the full-scale of the system. This
calibration should be preceded by a System Zero-
Scale or Internal Zero-Scale calibration. The Gain
Calibration Register for the selected channel is
updated at the end of this calibration sequence.
REV. A
相關PDF資料
PDF描述
VI-B7J-EY CONVERTER MOD DC/DC 36V 50W
RMM06DTKN-S288 CONN EDGECARD 12POS .156 EXTEND
VI-B7H-EY CONVERTER MOD DC/DC 52V 50W
SDS130R-302N INDUCTOR PWR SHIELDED 3.0UH SMD
VI-B74-EY CONVERTER MOD DC/DC 48V 50W
相關代理商/技術參數
參數描述
EVAL-AD7732EB 制造商:Analog Devices 功能描述:2-CHANNEL, ??10 V INPUT RANGE, HIGH THROUGHPUT, 24-BIT ADC
EVAL-AD7732EBZ 功能描述:BOARD EVAL FOR AD7732 RoHS:是 類別:編程器，開發系統 >> 評估板 - 模數轉換器 (ADC) 系列:- 產品培訓模塊:Obsolescence Mitigation Program 標準包裝:1 系列:- ADC 的數量:1 位數:12 采樣率（每秒）:94.4k 數據接口:USB 輸入范圍:±VREF/2 在以下條件下的電源（標準）:- 工作溫度:-40°C ~ 85°C 已用 IC / 零件:MAX11645 已供物品:板，軟件
EVAL-AD7734EBZ 功能描述:BOARD EVALUATION FOR AD7734 RoHS:是 類別:編程器，開發系統 >> 評估板 - 模數轉換器 (ADC) 系列:- 產品培訓模塊:Obsolescence Mitigation Program 標準包裝:1 系列:- ADC 的數量:1 位數:12 采樣率（每秒）:94.4k 數據接口:USB 輸入范圍:±VREF/2 在以下條件下的電源（標準）:- 工作溫度:-40°C ~ 85°C 已用 IC / 零件:MAX11645 已供物品:板，軟件
EVAL-AD7738EB 制造商:Analog Devices 功能描述:Evaluation Board For AD7738 ADC 制造商:Analog Devices 功能描述:EVALUATION BOARD I.C. - Bulk
EVAL-AD7738EBZ 功能描述:BOARD EVAL FOR AD7738 RoHS:是 類別:編程器，開發系統 >> 評估板 - 模數轉換器 (ADC) 系列:- 產品培訓模塊:Obsolescence Mitigation Program 標準包裝:1 系列:- ADC 的數量:1 位數:12 采樣率（每秒）:94.4k 數據接口:USB 輸入范圍:±VREF/2 在以下條件下的電源（標準）:- 工作溫度:-40°C ~ 85°C 已用 IC / 零件:MAX11645 已供物品:板，軟件
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*