
DS21FT42/DS21FF42
60 of 114
MR1/RMR2/RMR3: RECEIVE MARK REGISTERS (Address=2D to 2F Hex)
(MSB)
(LSB)
CH8
CH7
CH6
CH5
CH4
CH3
CH2
CH1
RMR1(2D)
CH16
CH15
CH14
CH13
CH12
CH11
CH10
CH9
RMR2(2E)
CH24
CH23
CH22
CH21
CH20
CH19
CH18
CH17
RMR3(2F)
SYMBOL
POSITION
NAME AND DESCRIPTION
CH1 - 24
RMR1.0 - 3.7
Receive Channel Mark Control Bits
0 =do not affect the receive data associated with this channel
1 = replace the receive data associated with this channel with
either the idle code or the digital milliwatt code (depends on
the RCR2.7 bit)
15.2.2 Per–Channel Code Insertion
The second method involves using the Receive Channel Control Registers (RCC1/2/3) to determine
which of the 24 T1 channels off of the T1 line and going to the backplane should be overwritten with the
code placed in the Receive Channel Registers (RC1 to RC24). This method is more flexible than the first
in that it allows a different 8–bit code to be placed into each of the 24 T1 channels.
RC1 TO RC24: RECEIVE CHANNEL REGISTERS
(Address=58 to 5F and 80 to 8F Hex)
(for brevity, only channel one is shown; see Table 8-1 for other register address)
(MSB)
(LSB)
C7
C6
C5
C4
C3
C2
C1
C0
RC1 (80)
SYMBOL
POSITION
NAME AND DESCRIPTION
C7
RC1.7
MSB of the Code (this bit is sent first to the backplane)
C0
RC1.0
LSB of the Code (this bit is sent last to the backplane)
RCC1/RCC2/RCC3: RECEIVE CHANNEL CONTROL REGISTER
(Address=1B to 1D Hex)
(MSB)
(LSB)
CH8
CH7
CH6
CH5
CH4
CH3
CH2
CH1
RCC1 (1B)
CH16
CH15
CH14
CH13
CH12
CH11
CH10
CH9
RCC2 (1C)
CH24
CH23
CH22
CH21
CH20
CH19
CH18
CH17
RCC3 (1D)
SYMBOL
POSITION
NAME AND DESCRIPTION
CH1 - 24
RCC1.0 - 3.7
Receive Code Insertion Control Bits
0 = do not insert data from the RC register into the receive
data stream
1 = insert data from the RC register into the receive data
stream