參數資料
型號： DS21554LN+
廠商： Maxim Integrated Products
文件頁數： 60/124頁
文件大小： 0K
描述： IC TXRX E1 1-CHIP 5V 100-LQFP
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 90
功能： 單芯片收發器
接口： E1，HDLC，J1，T1
電路數： 1
電源電壓： 4.75 V ~ 5.25 V
電流 - 電源： 75mA
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 100-LQFP
供應商設備封裝： 100-LQFP（14x14）
包裝： 托盤
包括： 遠程和 AIS 警報檢測器 / 發生器
產品目錄頁面： 1430 (CN2011-ZH PDF)
DS21354/DS21554 3.3V/5V E1 Single-Chip Transceivers
40 of 124
CCR4: COMMON CONTROL REGISTER 4 (Address = A8 Hex)
(MSB)
(LSB)
RLB
LLB
LIAIS
TCM4
TCM3
TCM2
TCM1
TCM0
SYMBOL
POSITION
NAME AND DESCRIPTION
RLB
CCR4.7
Remote Loopback.
0 = loopback disabled
1 = loopback enabled
LLB
CCR4.6
Local Loopback.
0 = loopback disabled
1 = loopback enabled
LIAIS
CCR4.5
Line Interface AIS Generation Enable.
0 = allow normal data from TPOSI/TNEGI to be transmitted at TTIP and
TRING
1 = force unframed all ones to be transmitted at TTIP and TRING at the
MCLK rate
TCM4
CCR4.4
Transmit Channel Monitor Bit 4. MSB of a channel decode that
determines which transmit channel data will appear in the TDS0M
register. See Section 8 for details.
TCM3
CCR4.3
Transmit Channel Monitor Bit 3.
TCM2
CCR4.2
Transmit Channel Monitor Bit 2.
TCM1
CCR4.1
Transmit Channel Monitor Bit 1.
TCM0
CCR4.0
Transmit Channel Monitor Bit 0. LSB of the channel decode.
5.5.
Remote Loopback
When CCR4.7 is set to a one, the SCT will be forced into remote loopback (RLB). In this loopback, data
input via the RPOSI and RNEGI pins will be transmitted back to the TPOSO and TNEGO pins. Data will
continue to pass through the receive-side framer of the SCT as it would normally and the data from the
transmit-side formatter will be ignored. Please see Figure 2-1 for more details.
5.6.
Local Loopback
When CCR4.6 is set to one, the SCT will be forced into local loopback (LLB). In this loopback, data will
continue to be transmitted as normal through the transmit side of the SCT. Data being received at RTIP
and RRING will be replaced with the data being transmitted. Data in this loopback will pass through the
jitter attenuator. Please see Figure 2-1 for more details.
相關PDF資料
PDF描述
DS21352LN+ IC TXRX T1 1-CHIP 3.3V 100-LQFP
DS2156L+ IC TXRX T1/E1/J1 1-CHIP 100-LQFP
DS2155LC2+ IC TXRX T1/E1/J1 SGL 100-LQFP
DS26504L+ IC T1/E1/J1 64KCC ELEMENT 64LQFP
MC908QT2AMFQE IC MCU 8BIT 1.5K FLASH 8-DFN
相關代理商/技術參數
參數描述
DS21554LN+ 功能描述:網絡控制器與處理器 IC 3.3/5V E1 Transceiver RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS2155DK 功能描述:網絡開發工具 RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V
DS2155G 功能描述:網絡控制器與處理器 IC T1/E1/J1 Transceiver RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS2155G/T&R 制造商:Maxim Integrated Products 功能描述:DS2155 T1/E1/J1 SCT 100P CSBGA T&R - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC LIU T1/E1/J1 SCT 100P CSBGA 制造商:Maxim Integrated Products 功能描述:Network Controller & Processor ICs T1/E1/J1 Transceiver
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*