![](http://datasheet.mmic.net.cn/260000/CA16A2CAA_datasheet_15873157/CA16A2CAA_27.png)
27
Agere Systems Inc.
Advance Data Sheet
March 2001
CA16-Type 2.5 Gbits/s DWDM Transponder with
16-Channel 155 Mbits/s Multiplexer/Demultiplexer
Qualification and Reliability
To help ensure high product reliability and customer satisfaction, Agere Systems Inc. is committed to an intensive
quality pro-gram that starts in the design phase and proceeds through the manufacturing process. Optoelectronics
modules are qualified to Agere internal standards using MIL-STD-883 test methods and procedures and using
sampling techniques consistent with
Telcordia Technologies
* requirements. This qualification program fully meets
the intent of
Telcordia Technologies
reliability practices TR-NWT-000468 and TA-TSY-000983. In addition, the
Agere Optoelectronics design, development, and manufacturing facility has been certified to be in full compliance
with the latest
ISO
9001 Quality System Standards.
*
Telcordia Technologies
is a trademark of Telcordia Technologies, Inc.
ISO
is a registered trademark of The International Organization for Standardization.
Laser Safety Information
Class I Laser Product
All versions of the CA16-type transponders are classified as Class I laser products per FDA/CDRH, 21 CFR 1040
Laser Safety requirements. The transponders have been registered/certified with the FDA under accession number
8720009. All versions are classified as Class I laser products per
IEC
825-1:1993.
CAUTION: Use of controls, adjustments, and procedures other than those specified herein may result in
hazardous laser radiation exposure.
This product complies with 21 CFR 1040.10 and 1040.11.
8.8
μ
m single-mode pigtail with connector.
Wavelength = 1.5
μ
m.
Maximum power = 2.0 mW.
Product is not shipped with power supply.
Because of size constraints, laser safety labeling is not affixed to the module but is attached to the outside of the
shipping carton.
NOTICE
Unterminated optical connectors can emit laser radiation.
Do not view with optical instruments.
Electromagnetic Emissions and Immunity
The CA16 transponder will be tested against CENELEC EN50 081 part 1 and part 2, FCC 15, Class B limits for
emissions.
The CA16 transponder will be tested against CENELEC EN50 082 part 1 immunity requirements.
IEC
is a registered trademark of The International Electrotechnical Commission.