參數資料
型號： ADV7393BCPZ-REEL
廠商： Analog Devices Inc
文件頁數： 73/108頁
文件大小： 0K
描述： IC DAC ENCODER VID HDTV 40-LFCSP
產品變化通告： ADV734x, ADV739x Feature Improvement
設計資源： Reconstruction Video Filter Using ADA4430-1 Amplifier After ADV7393 Video Encoder (CN0101)
標準包裝： 2,500
類型： 視頻編碼器
應用： 機頂盒，視頻播放器，顯示器
電壓 - 電源，模擬： 2.6 V ~ 3.46 V
電壓 - 電源，數字： 1.71 V ~ 1.89 V
安裝類型： 表面貼裝
封裝/外殼： 40-VFQFN 裸露焊盤，CSP
供應商設備封裝： 40-LFCSP-VQ（6x6）
包裝： 帶卷 (TR)
配用： ADV7393-DBRDZ-ND - BOARD EVAL FOR ADV7393
EVAL-ADV7393EBZ-ND - BOARD EVAL FOR ADV7393 ENCODER
Data Sheet
ADV7390/ADV7391/ADV7392/ADV7393
Rev. G | Page 67 of 108
PIXEL AND CONTROL PORT READBACK
Subaddress 0x13, Subaddress 0x14, Subaddress 0x16
The ADV739x supports the readback of most digital inputs via
the I2C MPU port. This feature is useful for board-level
connectivity testing with upstream devices.
The pixel port (P[15:0] or P[7:0]), HSYNC, VSYNC, and SFL
are available for readback via the MPU port. The readback
registers are located at Subaddress 0x13, Subaddress 0x14, and
Subaddress 0x16.
When using this feature, apply a clock signal to the CLKIN pin
to register the levels applied to the input pins. The SD input
mode (Subaddress 0x01, Bits[6:4] = 000) must be selected when
using this feature.
RESET MECHANISMS
Subaddress 0x17, Bit 1
A hardware reset is activated with a high-to-low transition on
the RESET pin in accordance with the timing specifications.
This resets all registers to their default values. After a hardware
reset, the MPU port is configured for I2C operation. For correct
device operation, a hardware reset is necessary after power-up.
The ADV739x also has a software reset accessible via the I2C
MPU port. A software reset is activated by writing a 1 to
Subaddress 0x17, Bit 1. This resets all registers to their default
values. This bit is self-clearing; that is, after a 1 has been written
to the bit, the bit automatically returns to 0.
A hardware reset is necessary after power-up for correct device
operation. If no hardware reset functionality is required by the
application, the RESET pin can be connected to an RC network
to provide the hardware reset necessary after power-up. After
power-up, the time constant of the RC network holds
the RESET pin low long enough to cause a reset to take place.
All subsequent resets can be done via software.
SD TELETEXT INSERTION
Subaddress 0xC9 to Subaddress 0xCE
The ADV739x supports the insertion of teletext data, using a
two pin interface, when operating in PAL mode. Teletext
insertion is enabled using Subaddress 0xC9, Bit 0.
In accordance with the PAL WST teletext standard, teletext data
should be inserted into the ADV739x at a rate of 6.9375 Mbps.
On the ADV7390/ADV7391, the teletext data is inserted on
the VSYNC pin. On the ADV7392/ADV7393, the teletext data
can be inserted on the VSYNC or P0 pin (selectable through
Subaddress 0xC9, Bit 2).
When teletext insertion is enabled, a teletext request signal is
output from the ADV739x to indicate when teletext data should
be inserted. The teletext request signal is output on the SFL pin.
The position (relative to the teletext data) and width of the
request signal are configurable using Subaddress 0xCA. The
request signal can operate in either a line or bit mode. The
request signal mode is controlled using Subaddress 0xC9, Bit 1.
To account for the noninteger relationship between the teletext
insertion rate (6.9375 Mbps) and the pixel clock (27 MHz),
a teletext insertion protocol is implemented in the ADV739x.
At a rate of 6.9375 Mbps, the time taken for the insertion of
37 teletext bits equates to 144 pixel clock cycles (at 27 MHz).
For every 37 teletext bits inserted into the ADV739x, the 10th,
19th, 28th, and 37th bits are carried for three pixel clock cycles, and
the remainder are carried for four pixel clock cycles (totaling
144 pixel clock cycles). The teletext insertion protocol repeats
every 37 teletext bits or 144 pixel clock cycles until all 360 teletext
bits are inserted.
Figure 85. Teletext VBI Line
06234-
143
ADDRESS AND DATA
RUN-IN CLOCK
TELETEXT VBI LINE
45 BYTES (360 BITS) – PAL
相關PDF資料
PDF描述
MC9S12GC32MFAE IC MCU 32K FLASH 25MHZ 48-LQFP
ADV7171KSUZ-REEL IC DAC VIDEO ENC NTSC 44TQFP TR
CS4954-CQZR IC VID ENCODER NTSC/PAL 48-TQFP
MC705P6ECDWE IC MCU 8BIT EPROM 28-SOIC
ADV7391BCPZ-REEL IC VIDEO ENCODER SD/HD 32-LFCSP
相關代理商/技術參數
參數描述
ADV7393-DBRDZ 功能描述:BOARD EVAL FOR ADV7393 RoHS:是 類別:編程器，開發系統 >> 評估演示板和套件 系列:Advantiv® 標準包裝:1 系列:- 主要目的:電信，線路接口單元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要屬性:T1/J1/E1 LIU 次要屬性:- 已供物品:板，電源，線纜，CD 其它名稱:82EBV2081
ADV7393EBZ 制造商:AD 制造商全稱:Analog Devices 功能描述:Low Power, Chip Scale 10-Bit SD/HD Video Encoder
ADV7393WBCPZ 制造商:Analog Devices 功能描述:LOW POWER, CHIP SCALE 10-BIT SD/HD VIDEO ENCODER - Trays
ADV7393WBCPZ-REEL 制造商:Analog Devices 功能描述:LOW POWER, CHIP SCALE 10-BIT SD/HD VIDEO ENCODER - Tape and Reel
ADV73946603 制造商:LG Corporation 功能描述:Frame Assembly
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*