參數資料
型號： 82845GE
廠商： Intel Corp.
英文描述： 82845GE Graphics and Memory Controller Hub (GMCH) and 82845PE Memory Controller Hub (MCH)
中文描述： 82845GE圖形和內存控制器中樞（GMCH）和82845PE內存控制器中樞（MCH）
文件頁數： 18/157頁
文件大?。?/td> 1407K
代理商： 82845GE
Intel
82845MP/82845MZ Chipset-Mobile (MCH-M)
18
Datasheet
250687-002
R
1.4.
AGP Interface
A single AGP component or connector (not both) is supported by the Intel
845MP/845MZ Chipset
MCH-M AGP interface. The AGP buffers operate only in 1.5-V mode. They are not 3.3-V safe.
The AGP interface supports 1x/2x/4x AGP signaling and 2x/4x Fast Writes. AGP semantic cycles to
DRAM are not snooped on the host bus. PCI semantic cycles to DRAM are snooped on the host bus. The
MCH-M supports PIPE# or SBA[7:0] AGP address mechanisms, but not both simultaneously. Either the
PIPE# or the SBA[7:0] mechanism must be selected during system initialization. Both upstream and
downstream addressing is limited to 32 bits for AGP and AGP/PCI transactions. The MCH-M contains a
32-deep AGP request queue. High priority accesses are supported. All accesses from the AGP/PCI
interface that fall within the Graphics Aperture address range pass through an address translation
mechanism with a fully associative 20 entry TLB. Accesses between AGP and hub interface are limited
to memory writes originating from the hub interface destined for AGP. The AGP interface is clocked
from a dedicated 66MHz clock (66IN). The AGP-to-host/core interface is asynchronous.
Consult the latest
AGP Busy and Stop Protocol Specification
for more information.
1.5.
Hub Interface
The 8-bit hub interface connects the MCH-M to the ICH3-M. All communication between the MCH-M
and the ICH3-M occurs over the hub interface. The hub interface runs at 66 MHz/266 MB/s. Aside from
the obvious traffic types, the following communication also occur over hub interface:
Interrupt related messages
Power management events as messages
SMI, SCI, and SERR error indication messages
It is assumed that the hub interface is always connected to an ICH3-M. This is a proprietary interconnect
between the MCH-M and the ICH3-M.
1.6.
MCH-M Clocking
The MCH-M has the following clock input pins:
Differential BCLK[1:0] for the host interface
66-MHz clock input for the AGP and hub interface
Clock Synthesizer chip(s) are responsible for generating the system Host clocks, AGP and hub interface
clocks, PCI clocks, and DRAM clocks. The Host target speed is 400 MT/s. The MCH-M does not
require any relationship between the HCLKIN host clock and the 66-MHz clock generated for AGP and
hub interface; they are totally asynchronous from each other. The AGP and hub interface runs at a
constant 66-MHz base frequency. The hub interface runs at 4x, while AGP transfers may be 1x, 2x, or
4x.
The following tables indicate the frequency ratios between the various interfaces that the MCH-M
supports.
相關PDF資料
PDF描述
8284A Clock Generator and Driver for 8066, 8088 Processors
8284A-1 Clock Generator and Driver for 8066, 8088 Processors
8284 TWO-OUTPUT LNB SUPPLY AND CONTROL-VOLTAGE REGULATOR
82865G Intel 865G/865GV Graphics and Memory Controller Hub
82865GV Intel 865G/865GV Graphics and Memory Controller Hub
相關代理商/技術參數
參數描述
82845GL 制造商:INTEL 制造商全稱:Intel Corporation 功能描述:Intel 82845G/82845GL/82845GV Graphics and Memory Controller Hub (GMCH)
82845GV 制造商:INTEL 制造商全稱:Intel Corporation 功能描述:Intel 82845G/82845GL/82845GV Graphics and Memory Controller Hub (GMCH)
82845GX 制造商:INTEL 制造商全稱:Intel Corporation 功能描述:Intel 82845G/82845GL/82845GV Graphics and Memory Controller Hub (GMCH)
82845MP 制造商:INTEL 制造商全稱:Intel Corporation 功能描述:Intel 845 Family Chipset-Mobile 82845MP/82845MZ Chipset Memory Controller Hub Mobile (MCH-M)
82845MX 制造商:INTEL 制造商全稱:Intel Corporation 功能描述:Intel 845 Family Chipset-Mobile 82845MP/82845MZ Chipset Memory Controller Hub Mobile (MCH-M)
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*