參數資料
型號： 71M6543F-IGT/F
廠商： MAXIM INTEGRATED PRODUCTS INC
元件分類： 模擬信號調理
英文描述： SPECIALTY ANALOG CIRCUIT, PQFP100
封裝： LEAD FREE, LQFP-100
文件頁數： 12/157頁
文件大?。?/td> 2178K
代理商： 71M6543F-IGT/F
71M6543F/H and 71M6543G/GH Data Sheet
v1.2
2008–2011 Teridian Semiconductor Corporation
109
Name
Location Rst Wk Dir
Description
FLSH_PWE
SFR B2[0]
0
R/W
Program Write Enable
0 = MOVX commands refer to External RAM Space, normal operation (default).
1 = MOVX @DPTR,A moves A to External Program Space (Flash) @ DPTR.
This bit is automatically reset after each byte written to flash. Writes to this bit are
inhibited when interrupts are enabled.
FLSH_RDE
2702[2]
–
R
Indicates that the flash may be read by ICE or SPI slave. FLSH_RDE = (!SECURE)
FLSH_UNLOCK[3:0]
2702[7:4]
0
R/W
Must be a 2 to enable any flash modification. See the description of Flash security for
more details.
FLSH_WRE
2702[1]
–
R
Indicates that the flash may be written through ICE or SPI slave ports.
IE_XFER
IE_RTC1S
IE_RTC1M
IE_RTCT
IE_SPI
IE_EEX
IE_XPULSE
IE_YPULSE
IE_WPULSE
IE_VPULSE
SFR E8[0]
SFR E8[1]
SFR E8[2]
SFR E8[3]
SFR F8[7]
SFR E8[7]
SFR E8[6]
SFR E8[5]
SFR F8[4]
SFR F8[3]
0
R/W
Interrupt flags for external interrupts 2 and 6. These flags monitor the source of the int6
and int2 interrupts (external interrupts to the MPU core). These flags are set by
hardware and must be cleared by the software interrupt handler. The IEX2 (SFR
0xC0[1]) and IEX6 (SFR 0xC0[5]) interrupt flags are automatically cleared by the MPU
core when it vectors to the interrupt handler. IEX2 and IEX6 must be cleared by writing
zero to their corresponding bit positions in SFR 0xC0, while writing ones to the other bit
positions that are not being cleared.
INTBITS
2707[6:0]
–
R
Interrupt inputs. The MPU may read these bits to see the input to external interrupts
INT0, INT1, up to INT6. These bits do not have any memory and are primarily intended
for debug use.
LCD_ALLCOM
2400[3]
0
–
R/W
Configures SEG/COM bits as COM. Has no effect on pins whose LCD_MAP bit is zero.
LCD_BAT
2402[7]
0
–
R/W
Connects the LCD power supply to VBAT in all modes.
LCD_BLNKMAP23[5:0]
LCD_BLNKMAP22[5:0]
2401[5:0]
2402[5:0]
0
–
R/W
Identifies which segments connected to SEG23 and SEG22 should blink. 1 means
blink. The most significant bit corresponds to COM5, the least significant, to COM0.
LCD_CLK[1:0]
2400[1:0]
0
–
R/W
Sets the LCD clock frequency. Note: fXTAL = 32768 Hz
LCD_CLK[1:0]
LCD Clock Frequency
00
fXTAL/2
9
01
fXTAL/2
8
10
fXTAL/2
7
11
fXTAL/2
6
相關PDF資料
PDF描述
71M6543H-IGTR/F SPECIALTY ANALOG CIRCUIT, PQFP100
71M6543F-IGTR/F SPECIALTY ANALOG CIRCUIT, PQFP100
71M6543H-IGT/F SPECIALTY ANALOG CIRCUIT, PQFP100
71M6543G-IGTR/F SPECIALTY ANALOG CIRCUIT, PQFP100
71M6543GH-IGTR/F SPECIALTY ANALOG CIRCUIT, PQFP100
相關代理商/技術參數
參數描述
71M6543F-IGTR/F 功能描述:計量片上系統 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 處理器系列:71M6511 類型:Metering SoC 最大時鐘頻率:70 Hz 程序存儲器大小:64 KB 數據 RAM 大小:7 KB 接口類型:UART 可編程輸入/輸出端數量:12 片上 ADC: 安裝風格:SMD/SMT 封裝 / 箱體:LQFP-64 封裝:Reel
71M6543FT-IGT/F 制造商:Maxim Integrated Products 功能描述:ENERGY METER ICS - Rail/Tube
71M6543FT-IGTR/F 制造商:Maxim Integrated Products 功能描述:3-PHASE SOC, 64KB FLASH, PRES TEMP SENSOR - Tape and Reel
71M6543G 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:Selectable Gain of 1 or 8 for One Current Energy Meter ICs Metrology Compensation
71M6543GH 制造商:未知廠家 制造商全稱:未知廠家 功能描述:電表IC
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*