參數資料
型號： 71M6532F-IGTR/F
廠商： MAXIM INTEGRATED PRODUCTS INC
元件分類： 電源管理
英文描述： 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PQFP100
封裝： LEAD FREE, LQFP-100
文件頁數： 39/120頁
文件大?。?/td> 2477K
代理商： 71M6532F-IGTR/F
FDS 6531/6532 005
Data Sheet 71M6531D/F-71M6532D/F
v1.3
2005-2010 TERIDIAN Semiconductor Corporation
25
Register
(Alternate Name)
SFR
Address
Bit Field
Name
R/W
Description
ERASE
(FLSH_ERASE)
0x94
W
This register is used to initiate either the Flash
Mass Erase cycle or the Flash Page Erase cycle.
See the Flash Memory section for details.
FL_BANK
0xB6[2:0]
R/W
Flash Bank Selection.
PGADDR
(FLSH_PGADR[5:0])
0xB7
R/W
Flash Page Erase Address register. Contains
the flash memory page address (page 0 through
page 127) that will be erased during the Page
Erase cycle (default = 0x00).
Must be re-written for each new Page Erase
cycle.
FLSHCRL
0xB2[0]
FLSH_PWE
R/W
Program Write Enable:
0:
MOVX commands refer to XRAM
Space, normal operation (default).
1:
MOVX @DPTR,A moves A to Program
Space (Flash) @ DPTR.
0xB2[1]
FLSH_MEEN
W
Mass Erase Enable:
0:
Mass Erase disabled (default).
1:
Mass Erase enabled.
Must be re-written for each new Mass Erase
cycle.
0xB2[6]
SECURE
R/W
Enables security provisions that prevent external
reading of flash memory and CE program RAM.
This bit is reset on chip reset and may only be
set. Attempts to write zero are ignored.
0xB2[7]
PREBOOT
R
Indicates that the preboot sequence is active.
IFLAGS
0xE8[0]
IE_XFER
R/W
This flag monitors the XFER_BUSY interrupt.
It is set by hardware and must be cleared by
the interrupt handler.
0xE8[1]
IE_RTC
R/W
This flag monitors the RTC_1SEC interrupt. It
is set by the hardware and must be cleared by
the interrupt handler.
0xE8[2]
FWCOL1
R/W
This flag indicates that a flash write was in
progress while the CE was busy.
0xE8[3]
FWCOL0
R/W
This flag indicates that a flash write was
attempted when the CE was attempting to
begin a code pass.
0xE8[4]
IE_PB
R/W
This flag indicates that the wake-up pushbutton
was pressed.
0xE8[5]
IE_WAKE
R/W
This flag indicates that the MPU was awakened
by the autowake timer.
0xE8[6]
PLL_RISE
R/W
PLL_RISE Interrupt Flag:
Write 0 to clear the PLL_RISE interrupt flag.
0xE8[7]
PLL_FALL
R/W
PLL_FALL Interrupt Flag:
Write 0 to clear the PLL_FALL interrupt flag.
INTBITS
(INT0 … INT6)
0xF8[6:0]
INT6 … INT0
R
Interrupt inputs. The MPU may read these bits
to see the status of external interrupts INT0 up
to INT6. These bits do not have any memory
and are primarily intended for debug use.
0xF8[7]
WD_RST
W
The WDT is reset when a 1 is written to this
bit.
Only byte operations on the entire INTBITS register should be used when
writing. The byte must have all bits set except the bits that are to be
cleared.
相關PDF資料
PDF描述
71M6534-IGT/F SPECIALTY ANALOG CIRCUIT, PQFP120
71M6534H-IGTR/F SPECIALTY ANALOG CIRCUIT, PQFP120
71M6533H-IGTR/F SPECIALTY ANALOG CIRCUIT, PQFP100
71M6534-IGTR/F SPECIALTY ANALOG CIRCUIT, PQFP120
71M6534H-IGT/F SPECIALTY ANALOG CIRCUIT, PQFP120
相關代理商/技術參數
參數描述
71M6533 制造商:TERIDIAN 制造商全稱:TERIDIAN 功能描述:Energy Meter IC
71M6533-DB 功能描述:開發板和工具包 - 8051 71M6533 Demo Brd RoHS:否 制造商:Silicon Labs 產品:Development Kits 工具用于評估:C8051F960, Si7005 核心: 接口類型:USB 工作電源電壓:
71M6533G 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:Exceeds IEC 62053/ANSI C12.20 Standards
71M6533G-IGTR/F 功能描述:計量片上系統 - SoC AC Power Monitoring SoC-Programd RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 處理器系列:71M6511 類型:Metering SoC 最大時鐘頻率:70 Hz 程序存儲器大小:64 KB 數據 RAM 大小:7 KB 接口類型:UART 可編程輸入/輸出端數量:12 片上 ADC: 安裝風格:SMD/SMT 封裝 / 箱體:LQFP-64 封裝:Reel
71M6533H 制造商:TERIDIAN 制造商全稱:TERIDIAN 功能描述:Energy Meter IC
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*