501
APPENDIX B DEVELOPMENT TOOLS
B.3 Debugging Tools
B.3.1 Hardware (1/2)
(1) When using the in-circuit emulator IE-78K0-NS
IE-78K0-NS
Note
In-circuit Emulator
IE-70000-MC-PS-B
Power Supply Unit
IE-70000-98-IF-C
Note
Interface Adapter
IE-70000-CD-IF
Note
PC Card Interface
IE-70000-PC-IF-C
Note
Interface Adapter
IE-78018-NS-EM1
Note
Emulation Board
NP-64GC
Emulation Probe
EV-9200GC-64
Conversion Socket
(Refer to
Figure B-2
)
NP-64GK
Emulation Probe
TGK-064SBW
Conversion Adapter
(Refer to
Figure B-4
)
EV-9900
Note
Under development
Remarks 1.
NP-64GC and NP-64GK are products of Naito Densei Machida Mfg. Co., Ltd.
Naito Densei Machida Mfg. Co., Ltd (TEL (044) 822-3813).
2.
TGK-064SBW is a product of TOKYO ELETECH Corporation.
Reference: Daimaru Kogyo Ltd. Electronics Dept. (TEL: Tokyo 03-3820-7112)
Electronics 2nd Dept. (TEL: Osaka 06-244-6672)
3.
EV-9200GC-64 is sold in five units.
4.
TGK-064SBW is sold in one units.
The in-circuit emulator serves to debug hardware and software when developing
application systems using a 78K/0 Series product. It corresponds to integrated
debugger (ID78K0-NS). This emulator should be used in combination with power
supply unit, emulation probe, and interface adapter which is required to connect this
emulator to the host machine.
This adapter is used for supplying power from a receptacle of 100-V to 240-V AC.
This adapter is required when using the PC-9800 Series computer (except notebook
type) as the IE-78K0-NS host machine.
This is PC card and interface cable required when using the PC-9800 Series
notebook-type computer as the IE-78K0-NS host machine.
This adapter is required when using the IBM PC/AT and its compatible computers
as the IE-78K0-NS host machine.
This board emulates the operations of the peripheral hardware peculiar to a device.
It should be used in combination with an in-circuit emulator.
This probe is used to connect the in-circuit emulator to the target system and is
designed for 64-pin plastic QFP (GC-AB8 type).
This conversion socket connects the NP-64GC to the target system board designed
to mount a 64-pin plastic QFP (GC-AB8 type).
Instead of connecting the NP-64GC, the
μ
PD78P018FKK-S or 78P018FYKK-S
(ceramic WQFN) can also be connected.
This probe is used to connect the in-circuit emulator to the target system and is
designed for 64-pin plastic LQFP (GK-8A8 type).
This conversion socket connects the NP-64GK to the target system board designed
to mount a 64-pin plastic LQFP (GK-8A8 type).
Jig used to remove the
μ
PD78P018FKK-S or 78P018FYKK-S from the EV9200GC-
64.