567
APPENDIX B DEVELOPMENT TOOLS
B.3.1 Hardware (2/2)
(2) When using the in-circuit emulator IE-78001-R-A
IE-78001-R-A
Note
In-circuit Emulator
IE-70000-98-IF-B or
IE-70000-98-IF-C
Note
Interface Adapter
IE-70000-PC-IF-B or
IE-70000-PC-IF-C
Note
Interface Adapter
IE-78000-R-SV3
Interface Adapter
IE-780308-NS-EM1
Note
Emulation Board
IE-78K0-R-EX1
Note
Emulation Prove
Conversion Board
IE-780058GC-R
Note
Emulation Probe
EV-9200GC-80
Conversion Socket
(Refer to
Figure
B-2
)
EP-780058GK-R
Emulation Probe
TGK-080SDW
Conversion Adapter
(Refer to
Figure
B-3
)
Note
Under development
Remarks 1.
TGK-080SDW is a product of TOKYO ELETECH Corporation.
For further information, consult:
Tokyo Electronic Components Div. (TEL (03) 3820-7112), or
Osaka Electronic Components Div. (TEL (06) 244-6672)
Daimaru Kogyo Corporation.
2.
EV-9200GC-80s are sold in sets of five units.
3.
TGK-080SDW is sold in single units.
This is an in-circuit emulator for debugging the hardware and software when an
application system using the 78K/0 Series is developed. It supports the integrated
debugger (ID78K0). This emulator is used with an emulation probe and interface
adapter for connecting a host machine.
This adapter is necessary when a PC-9800 series PC (except notebook type) is
used as the host machine for the IE-78001-R-A.
This adapter is necessary when an IBM PC/AT or a compatible machine is used as
the host machine for the IE-78001-R-A.
These are an adapter and a cable necessary when an EWS is used as the host
machine for the IE-78001-R-A. They are connected to the board in the IE-78001-R-
A.
As Ethernet
TM
, 10Base-5 is supported. A commercially available adapter is
necessary if any other method is used.
This board is used with an in-circuit emulator and emulation probe conversion board
to emulate device-specific peripheral hardware.
This is a board necessary when using the IE-780308-NS-EM1 with the IE-78001-R-
A.
This probe is for 80-pin plastic QFP (GC-3B9 and GC-8BT types) and connects an
in-circuit emulator and the target system.
This conversion socket connects the board of the target system created to mount
80-pin plastic QFP (GC-3B9 and GC-8BT types) and EP-780058GC-R.
This probe is for 80-pin plastic TQFP (GK-BE9 type) and connects an in-circuit
emulator and the target system.
This conversion adapter connects the board of the target system created to mount
80-pin plastic TQFP (GK-BE9 type) and EP-780058GK-R.