566
APPENDIX B DEVELOPMENT TOOLS
B.3 Debugging Tools
B.3.1 Hardware (1/2)
(1) When using the in-circuit emulator IE-78K0-NS
IE-78K0-NS
Note
In-circuit Emulator
IE-70000-MC-PS-B
Power Supply Unit
IE-70000-98-IF-C
Note
Interface Adapter
IE-70000-CD-IF
Note
PC Card Interface
IE-70000-PC-IF-C
Note
Interface Adapter
IE-780308-NS-EM1
Note
Emulation Board
NP-80GC
Emulation Probe
EV-9200GC-80
Conversion Socket
(Refer to
Figure
B-2
)
NP-80GK
Emulation Probe
TGK-080SDW
Conversion Adapter
(Refer to
Figure
B-3
)
Note
Under development
Remarks 1.
NP-80GC and NP-80GK are products of Naitou Densei Machidaseisakusho Co., Ltd.
For further information, consult: Naitou Densei Machidaseisakusho Co., Ltd. (TEL (044) 822-3813).
2.
TGK-080SDW is a product of TOKYO ELETECH Corporation.
For further information, consult:
Tokyo Electronic Components Div. (TEL (03) 3820-7112), or
Osaka Electronic Components Div. (TEL (06) 244-6672)
Daimaru Kogyo Corporation.
3.
EV-9200GC-80s are sold in sets of five units.
4.
TGK-080SDW is sold in single units.
This is an in-circuit emulator for debugging the hardware and software when an
application system using the 78K/0 Series is developed. It supports the integrated
debugger (ID78K0-NS). This emulator is used with a power supply unit, emulation
probe, and interface adapter for connecting a host machine.
This adapter is used to supply power from an AC 100 to 240-V outlet.
This adapter is necessary when a PC-9800 series PC (except notebook type) is
used as the host machine for the IE-78K0-NS.
There are a PC card and an interface cable necessary when the PC-9800 series
notebook type computer is used as the host machine for the IE-78K0-NS.
This adapter is necessary when IBM PC/AT or a compatible machine is used as the
host machine for the IE-78K0-NS.
This board is used with an in-circuit emulator to emulate device-specific peripheral
hardware.
This probe is for 80-pin plastic QFP (GC-3B9 and GC-8BT types) and connects an
in-circuit emulator and the target system.
This conversion socket connects the board of the target system created to mount
80-pin plastic QFP (GC-3B9 and GC-8BT types) and NP-80GC.
This probe is for 80-pin plastic TQFP (GK-BE9 type) and connects an in-circuit
emulator and the target system.
This conversion adapter connects the board of the target system created to mount
80-pin plastic TQFP (GK-BE9 type) and TGK-080SDW.