參數資料
型號: ZR36067
廠商: Electronic Theatre Controls, Inc.
英文描述: AV PCI CONTROLLER
中文描述: 影音PCI控制器
文件頁數: 46/48頁
文件大?。?/td> 580K
代理商: ZR36067
46
AV PCI CONTROLLER
Appendix C: Fitting the Input Size to the Required Display Window
The ZR36067 can crop the input video and scale it down to
match any display size required by different applications, as long
as the required size is not larger than the original input. This
appendix provides some programming guidelines for proper
setting of the ZR36067 parameters involved in this process.
For better understanding, a typical example is detailed along
with the general explanations.
It is assumed that the driver software “knows” the following basic
parameters about the incoming video:
It is assumed that Ha is an even number. It is also assumed that
from knowing the video input format, the driver knows how to set
the following ZR36067 parameters, such that the entire active
portion of the video input would have been sampled:
The following equation connects HStart’, HEnd’, and Wa:
Wa = HEnd’ - HStart’ + 1
In the example, Hend’ = 841, HStart’ = 122.
The following equation connects VStart’, VEnd’, and Ha:
Ha/2 = VEnd’ - VStart’ + 1
In the example, Vend’ = 249, VStart’ = 10.
The driver receives from the application software the parameters
that define the size of the rectangle, on the monitor, that should
be filled with video pixels. This is referred to as the destination
rectangle:
Obviously, in many cases the size of the video rectangle to be
displayed is different (smaller) than the size of the active video
input sampled by the ZR36067.
In the example: VidWinWid = 597, VidWinHt = 199. (Assuming
DispMod = 0, this means that the target “video window” in the
example is 597x398).
In such cases, out of the parameters above, the driver software
must determine the following ZR36067 parameters, such that
the quality of the displayed video is optimal in the sense that the
decimation factors will be as small as possible and the portions
of the input that are “cut out” (cropped) will also be as small as
possible.
Wt
Total width of the input field (i.e., in CCIR NTSC Wt = 858).
Wa
Active width of the input field (i.e., in CCIR NTSC Wa = 720).
Ht
Total height of the input frame (i.e., in CCIR NTSC Ht = 525).
Ha
Active height of the input frame (i.e., in CCIR NTSC Ht = 480).
HSPol
The polarity of HSYNC, as defined in the ZR36067 data
sheet.
VSPol
The polarity of VSYNC, as defined in the ZR36067 data
sheet.
HStart’
The number of pixels, from the active edge of HSYNC, after
which the ZR36067 starts to sample the input.
HEnd’
The number of pixels, from the active edge of HSYNC, after
which the ZR36067 stops sampling the input.
VStart’
The number of lines, from the active edge of VSYNC, after
which the ZR36067 starts to sample the input.
VEnd’
The number of lines, from the active edge of VSYNC, after
which the ZR36067 stops sampling the input.
VidWinWid
Width of the video rectangle.
VidWinHt
If DispMode=1 (single field display) this is the height of
the video rectangle. If DispMode=0 (emulation of inter-
laced video) this is half of the height of the video
rectangle (i.e., the height of one destination field).
Note that if DispMode=0 the vertical size of the video
rectangle must be an even number. This limitation might
conflict with applications that will require a video window
of a specific, odd vertical size. Such conflicts will be
resolved by the driver software, which in this case will
build a rectangle one line shorter than required, and
then fill-in the missing line (a-priori) with a background
color.
hcrop1
The number of pixels, that will be dropped from the begin-
ning of the active line. hcrop1 is not really a ZR36067
parameter, but it is useful to obtain HStart:
HStart = HStart’ + hcrop1.
hcrop2
The number of pixels, that will be dropped from the end of
the active line. hcrop2 is not really a ZR36067 parameter,
but it is useful to obtain HEnd:
HEnd = HEnd’ - hcrop2.
vcrop1
The number of lines, that will be dropped from the begin-
ning of the active field. vcrop1 is not really a ZR36067
parameter, but it is useful to obtain VStart:
VStart = VStart’ + vcrop1.
vcrop2
The number of lines, that will be dropped from the end of
the active field. vcrop2 is not really a ZR36067 parameter,
but it is useful to obtain VEnd:
VEnd = VEnd’ - vcrop2.
HorDcm
Ratio of horizontal decimation. A number of HorDcm pixels
will be dropped out of every consecutive 64 pixels in an
input line. HorDcm/64 is the horizontal decimation factor.
VerDcm
Ratio of vertical decimation. A number of VerDcm pixels
will be dropped out of every consecutive 64 lines in an
input field. VerDcm/64 is the vertical decimation factor.
HFilter
The horizontal filter through which the input is passed. The
filter is selected according to the horizontal decimation
factor that is first determined.
相關PDF資料
PDF描述
ZR36067PQC AV PCI CONTROLLER
ZR36067 PCI Adapter Intended for Multimedia Applications on PCI Systems(PCI(外圍部件互連)適配器(用于PCI系統的多媒體))
ZR36215 SupraAV SVCD Decoder(SupraAV 超級VCD解碼器)
ZR36419 Digital Camera Processor(數字?jǐn)z影處理器)
ZR36420 Digital Camera Processor(數字?jǐn)z影處理器)
相關代理商/技術參數
參數描述
ZR36067PQC 制造商:未知廠家 制造商全稱:未知廠家 功能描述:AV PCI CONTROLLER
ZR36067PQC-LV 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Peripheral IC
ZR36100PQC 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Audio/Video Decoder for MPEG
ZR36110PQC 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Audio/Video Decoder for MPEG
ZR36120PQC 制造商:未知廠家 制造商全稱:未知廠家 功能描述: