參數資料
型號: W78E62B
廠商: WINBOND ELECTRONICS CORP
元件分類: 8位微控制器
英文描述: 8-BIT MICROCONTROLLER
中文描述: 8位微控制器
文件頁數: 14/34頁
文件大?。?/td> 393K
代理商: W78E62B
W78E62B
- 14 -
In-System Programming Control Register (CHPCON)
CHPCON (BFH)
BIT
NAME
FUNCTION
7
SWRESET
(F04KMODE)
When this bit is set to 1, and both FBOOTSL and FPROGEN are set to 1. It
will enforce microcontroller reset to initial condition just like power on reset.
This action will re-boot the microcontroller and start to normal operation. To
read this bit in logic-1 can determine that the F04KBOOT mode is running.
6
-
Reserve.
5
-
Reserve.
4
ENAUXRAM
1: Enable on-chip AUX-RAM.
0: Disable the on-chip AUX-RAM
3
0
must set to 0.
2
0
must set to 0.
1
FBOOTSL
The Program Location Select.
0: The Loader Program locates at the 64 KB APROM. 4 KB LDROM is
destination for re-programming.
1: The Loader Program locates at the 4 KB memory bank. 64 KB APROM is
destination for re-programming.
0
FPROGEN
MTP-ROM Programming Enable.
= 1:enable. The microcontroller enter the in-system programming mode after
entering the idle mode and wake-up from interrupt. During in-system
programming mode, the operation of erase, program and read are acheived
when device enters idle mode.
= 0 0:disable. The on-chip flash memory is read-only. In-system
programmability is disabled.
F04KBOOT Mode (Boot From LDROM )
By default, the W78E62B boots from APROM program after a power on reset. On some occasions,
user can force the W78E62B to boot from the LDROM program via following settings. The possible
situation that you need to enter F04KBOOT mode is when the APROM program can not run properly
and device can not jump back to LDROM to execute in-system programming function. Then you can
use this F04KBOOT mode to force the W78E62B jumps to LDROM and excutes in-system
programming procedure. When you design your system, you may reserve the pins P2.6, P2.7 to
switches or jumpers. For example in a CD-ROM system, you can connect the P2.6 and P2.7 to PLAY
and EJECT buttons on the panel. When the APROM program fails to execute the normal application
program. User can press both two buttons at the same time and then turn on the power of the
personal computer to force the W78E62B to enter the F04KBOOT mode. After power on of personal
computer, you can release both buttons and finish the in-system programming procedure to update
the APROM code. In application system design, user must take care of the P2, P3, ALE, EA and
PSEN pin value at reset to prevent from accidentally activating the programming mode or
F04KBOOT mode.
相關PDF資料
PDF描述
W78E858 8 BIT MICROCONTROLLER
W78ERD2_07 8-BIT MICROCONTROLLER
W78ERD2A 8-BIT MICROCONTROLLER
W78ERD2A40DL 8-BIT MICROCONTROLLER
W78ERD2A40FL 8-BIT MICROCONTROLLER
相關代理商/技術參數
參數描述
W78E858 制造商:WINBOND 制造商全稱:Winbond 功能描述:8 BIT MICROCONTROLLER
W78E858_06 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER
W78E858A40DL 功能描述:IC MCU 8-BIT 32K FLASH 40-DIP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:W78 標準包裝:250 系列:80C 核心處理器:8051 芯體尺寸:8-位 速度:16MHz 連通性:EBI/EMI,I²C,UART/USART 外圍設備:POR,PWM,WDT 輸入/輸出數:40 程序存儲器容量:- 程序存儲器類型:ROMless EEPROM 大小:- RAM 容量:256 x 8 電壓 - 電源 (Vcc/Vdd):4.5 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:68-LCC(J 形引線) 包裝:帶卷 (TR)
W78E858A40FL 功能描述:IC MCU 8-BIT 32K FLASH 44-PQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:W78 標準包裝:250 系列:80C 核心處理器:8051 芯體尺寸:8-位 速度:16MHz 連通性:EBI/EMI,I²C,UART/USART 外圍設備:POR,PWM,WDT 輸入/輸出數:40 程序存儲器容量:- 程序存儲器類型:ROMless EEPROM 大小:- RAM 容量:256 x 8 電壓 - 電源 (Vcc/Vdd):4.5 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:68-LCC(J 形引線) 包裝:帶卷 (TR)
W78E858A40PL 功能描述:IC MCU 8-BIT 32K FLASH 44-PLCC RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:W78 標準包裝:250 系列:80C 核心處理器:8051 芯體尺寸:8-位 速度:16MHz 連通性:EBI/EMI,I²C,UART/USART 外圍設備:POR,PWM,WDT 輸入/輸出數:40 程序存儲器容量:- 程序存儲器類型:ROMless EEPROM 大小:- RAM 容量:256 x 8 電壓 - 電源 (Vcc/Vdd):4.5 V ~ 5.5 V 數據轉換器:A/D 8x10b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:68-LCC(J 形引線) 包裝:帶卷 (TR)