參數(shù)資料
型號: W77IE58
廠商: WINBOND ELECTRONICS CORP
元件分類: 微控制器/微處理器
英文描述: 8-BIT MICROCONTROLLER
中文描述: 8-BIT, FLASH, 25 MHz, MICROCONTROLLER, PDIP40
封裝: DIP-40
文件頁數(shù): 45/90頁
文件大小: 409K
代理商: W77IE58
Preliminary W77IE58
Publication Release Date: July 2000
- 45 -
Revision A1
Machine cycles in standard 8032 = 10 + (26 * CNT)
Machine cycles in W77IE58 = 10 + (26 * CNT)
If CNT = 50
Clock cycles in standard 8032= ((10 + (26 *50)) * 12 = (10 + 1300) * 12 = 15720
Clock cycles in W77IE58 = ((10 + (26 * 50)) * 4 = (10 + 1300) * 4 = 5240
Block Move with Two Data Pointers in W77IE58:
; SH and SL are the high and low bytes of Source Address
; DH and DL are the high and low bytes of Destination Address
; CNT is the number of bytes to be moved
MOV
R2, #CNT
; Load R2 with the count value
MOV
DPS, #00h
; Clear DPS to point to DPTR
MOV
DPTR, #DHDL ; Load DPTR with Destination address
INC
DPS
; Set DPS to point to DPTR1
MOV
DPTR, #SHSL ; Load DPTR1 with Source address
LOOP:
MOVX A, @DPTR
; Get data from Source block
INC
DPTR
; Increment source address
DEC
DPS
; Clear DPS to point to DPTR
MOVX @DPTR, A
; Write data to Destination
INC
DPTR
; Increment destination address
INC
DPS
; Set DPS to point to DPTR1
DJNZ
R2, LOOP
; Check if all done
Machine cycles of W77IE58
#
2
2
3
2
3
2
2
2
2
2
2
3
Machine cycles in W77IE58 = 12 + (15 * CNT)
If CNT = 50
Clock cycles in W77IE58 = (12 + (15 * 50)) * 4 = (12 + 750) * 4 = 3048
We can see that in the first program the standard 8032 takes 15720 cycles, while the W77IE58 takes
only 5240 cycles for the same code. In the second program, written for the W77IE58, program execution
requires only 3048 clock cycles. If the size of the block is increased then the saving is even greater.
External Data Memory Access Timing
The timing for the MOVX instruction is another feature of the W77IE58. In the standard 8032, the MOVX
instruction has a fixed execution time of 2 machine cycles. However in the W77IE58, the duration of the
access can be varied by the user.
The instruction starts off as a normal op-code fetch of 4 clocks. In the next machine cycle, the W77IE58
puts out the address of the external Data Memory and the actual access occurs here. The user can
change the duration of this access time by setting the STRETCH value. The Clock Control SFR
(CKCON) has three bits that control the stretch value. These three bits are M2-0 (bits 2-0 of CKCON).
These three bits give the user 8 different access time options. The stretch can be varied from 0 to 7,
resulting in MOVX instructions that last from 2 to 9 machine cycles in length. Note that the stretching of
相關PDF資料
PDF描述
W77L32 8-BIT MICROCONTROLLER
W77LE532 8 BIT MICROCONTROLLER
W77LE58 8 BIT MICROCONTROLLER
W77LE58-25 8 BIT MICROCONTROLLER
W77LE58F-25 8 BIT MICROCONTROLLER
相關代理商/技術參數(shù)
參數(shù)描述
W77IE58_06 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER
W77J_1G WAF 制造商:Fairchild Semiconductor Corporation 功能描述:
W77J_2GST WAF 制造商:Fairchild Semiconductor Corporation 功能描述:
W77J_3G WAF 制造商:Fairchild Semiconductor Corporation 功能描述:
W77L032A 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER