參數資料
型號： W25Q32BWZPIP
廠商： WINBOND ELECTRONICS CORP
元件分類： PROM
英文描述： 4M X 8 SPI BUS SERIAL EEPROM, DSO8
封裝： 6 X 5 MM, GREEN, WSON-8
文件頁數： 26/72頁
文件大小： 2212K
代理商： W25Q32BWZPIP
W25Q32BW
- 32 -
10.2.15 Word Read Quad I/O (E7h)
The Word Read Quad I/O (E7h) instruction is similar to the Fast Read Quad I/O (EBh) instruction except
that the lowest Address bit (A0) must equal 0 and only two Dummy clock are required prior to the data
output. The Quad I/O dramatically reduces instruction overhead allowing faster random access for code
execution (XIP) directly from the Quad SPI. The Quad Enable bit (QE) of Status Register-2 must be set to
enable the Word Read Quad I/O Instruction. To ensure optimum performance the High Performance
Mode (HPM) instruction (A3h) must be executed once, prior to the Fast Read Quad I/O Instruction.
Word Read Quad I/O with “Continuous Read Mode”
The Word Read Quad I/O instruction can further reduce instruction overhead through setting the
“Continuous Read Mode” bits (M7-0) after the input Address bits (A23-0), as shown in figure 14a. The
upper nibble of the (M7-4) controls the length of the next Fast Read Quad I/O instruction through the
inclusion or exclusion of the first byte instruction code. The lower nibble bits of the (M3-0) are don’t care
(“x”). However, the IO pins should be high-impedance prior to the falling edge of the first data out clock.
If the “Continuous Read Mode” bits M5-4 = (1,0), then the next Fast Read Quad I/O instruction (after /CS
is raised and then lowered) does not require the E7h instruction code, as shown in figure 14b. This
reduces the instruction sequence by eight clocks and allows the Read address to be immediately entered
after /CS is asserted low. If the “Continuous Read Mode” bits M5-4 do not equal to (1,0), the next
instruction (after /CS is raised and then lowered) requires the first byte instruction code, thus returning to
normal operation. A “Continuous Read Mode” Reset instruction can also be used to reset (M7-0) before
issuing normal instructions (See 10.2.19 for detail descriptions).
Instruction (E7h)
Byte 1
Byte 2
Byte 3
40
51
62
73
Instruction (E7h)
Byte 1
Byte 2
Byte 3
40
51
62
73
Figure 14a. Word Read Quad I/O Instruction Sequence (Initial instruction or previous M5-4
≠ 10)
相關PDF資料
PDF描述
W949D2CBJX5E 16M X 32 DDR DRAM, 5 ns, PBGA90
WF128K32N-150HC5 512K X 8 FLASH 5V PROM MODULE, 150 ns, HIP66
WPS512K8LB-85GM 512K X 8 STANDARD SRAM, 85 ns, PDSO32
WPS128K32GV-17PJI 512K X 8 MULTI DEVICE SRAM MODULE, 17 ns, PQMA68
WF2M32B-150HM5 8M X 8 FLASH 5V PROM MODULE, 150 ns, CHIP66
相關代理商/技術參數
參數描述
W25Q32DW 制造商:WINBOND 制造商全稱:Winbond 功能描述:1.8V 32M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI
W25Q32DWSFIG 功能描述:IC FLASH SPI 32MBIT 16SOIC RoHS:是 類別:集成電路 (IC) >> 存儲器 系列:SpiFlash® 標準包裝:2,500 系列:- 格式 - 存儲器:EEPROMs - 串行 存儲器類型:EEPROM 存儲容量:1K (128 x 8) 速度:100kHz 接口:UNI/O?（單線） 電源電壓:1.8 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 封裝/外殼:8-TSSOP，8-MSOP（0.118"，3.00mm 寬） 供應商設備封裝:8-MSOP 包裝:帶卷 (TR)
W25Q32DWSFIP 制造商:WINBOND 制造商全稱:Winbond 功能描述:1.8V 32M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI
W25Q32DWSSIG 功能描述:IC FLASH SPI 32MBIT 8SOIC RoHS:是 類別:集成電路 (IC) >> 存儲器 系列:SpiFlash® 標準包裝:2,500 系列:- 格式 - 存儲器:EEPROMs - 串行 存儲器類型:EEPROM 存儲容量:1K (128 x 8) 速度:100kHz 接口:UNI/O?（單線） 電源電壓:1.8 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 封裝/外殼:8-TSSOP，8-MSOP（0.118"，3.00mm 寬） 供應商設備封裝:8-MSOP 包裝:帶卷 (TR)
W25Q32DWSSIP 制造商:WINBOND 制造商全稱:Winbond 功能描述:1.8V 32M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*