
μ
PD78F0034A, 78F0034AY
17
Data Sheet U14040EJ4V0DS
4. DIFFERENCES BETWEEN
μ
PD78F0034A, 78F0034AY, AND MASK ROM VERSIONS
The
μ
PD78F0034A and 78F0034AY are products provided with a flash memory which enables writing, erasing,
and rewriting of programs with device mounted on the target system.
The functions of the
μ
PD78F0034A (except the functions specified for flash memory) can be made the same as
those of the mask ROM versions by setting the memory size switching register (IMS).
Tables 4-1 and 4-2 show the differences between the
μ
PD78F0034A, 78F0034AY and the mask ROM versions.
Table 4-1. Differences Between
μ
PD78F0034A and Mask ROM Versions
Item
μ
PD78F0034A
Mask ROM Versions
μ
PD780034A Subseries
μ
PD780024A Subseries
Note
Internal ROM structure
Flash memory
Mask ROM
Internal ROM capacity
32 KB
μ
PD780031A: 8 KB
μ
PD780032A: 16 KB
μ
PD780033A: 24 KB
μ
PD780034A: 32 KB
μ
PD780021A: 8 KB
μ
PD780022A: 16 KB
μ
PD780023A: 24 KB
μ
PD780024A: 32 KB
Internal high-speed RAM capacity
1,024 bytes
μ
PD780031A: 512 bytes
μ
PD780032A: 512 bytes
μ
PD780033A: 1,024 bytes
μ
PD780034A: 1,024 bytes
μ
PD780021A: 512 bytes
μ
PD780022A: 512 bytes
μ
PD780023A: 1,024 bytes
μ
PD780024A: 1,024 bytes
Minimum instruction execution time
Minimum instruction execution time variable function incorporated
When main system clock is selected
0.24
μ
s/0.48
μ
s/0.95
μ
s/
1.91
μ
s/3.81
μ
s
(operation at 8.38 MHz,
V
DD
= 4.0 to 5.5 V)
0.166
μ
s/0.333
μ
s/0.666
μ
s/1.33
μ
s/2.66
μ
s
(operation at 12 MHz, V
DD
= 4.5 to 5.5 V)
When subsystem clock is selected
122
μ
s (32.768 kHz)
Clock output
65.5 kHz, 131 kHz,
262 kHz, 524 kHz,
1.05 MHz, 2.10 MHz,
4.19 MHz, 8.38 MHz
(operation at 8.38 MHz
with main system clock)
32.768 kHz
(operation at 32.768 kHz
with subsystem clock)
93.75 kHz, 187.5 kHz, 375 kHz, 750 kHz,
1.25 MHz, 3 MHz, 6 MHz, 12 MHz
(operation at 12 MHz with main system clock)
32.768 kHz
(operation at 32.768 kHz with subsystem clock)
Buzzer output
1.02 kHz, 2.5 kHz,
4.10 kHz, 8.19 kHz
(operation at 8.38 MHz
with main system clock)
1.46 kHz, 2.93 kHz, 5.86 kHz, 11.7 kHz
(operation at 12 MHz with main system clock)
A/D converter resolution
10 bits
8 bits
Mask option specification of on-chip
pull-up resistor for pins P30 to P33
Not available
Available
IC pin
Not provided
Provided
V
PP
pin
Provided
Not provided
Electrical specifications,
recommended soldering conditions
Refer to the data sheet of individual products.
Note
The
μ
PD78F0034A can be used as the flash memory version of the
μ
PD780024A Subseries.
Caution There are differences in noise immunity and noise radiation between the flash memory and mask
ROM versions. When pre-producing an application set with the flash memory version and then mass
producing it with the mask ROM version, be sure to conduct sufficient evaluations on the
commercial samples (CS) (not engineering samples (ES)) of the mask ROM versions.