參數資料
型號: TSXPC603RVGB/Q14LC
廠商: ATMEL CORP
元件分類: 微控制器/微處理器
英文描述: 32-BIT, 300 MHz, RISC PROCESSOR, CBGA255
封裝: 21 X 21 MM, 3 MM HEIGHT, 1.27 MM PITCH, CERAMIC, BGA-255
文件頁數: 30/83頁
文件大小: 8336K
代理商: TSXPC603RVGB/Q14LC
28
8021G–AVR–03/11
ATmega329P/3290P
8.1.4
Asynchronous Timer Clock – clk
ASY
The Asynchronous Timer clock allows the Asynchronous Timer/Counter and the LCD controller
to be clocked directly from an external clock or an external 32kHz clock crystal. The dedicated
clock domain allows using this Timer/Counter as a real-time counter even when the device is in
sleep mode. It also allows the LCD controller output to continue while the rest of the device is in
sleep mode.
8.1.5
ADC Clock – clk
ADC
The ADC is provided with a dedicated clock domain. This allows halting the CPU and I/O clocks
in order to reduce noise generated by digital circuitry. This gives more accurate ADC conversion
results.
8.2
Clock Sources
The device has the following clock source options, selectable by Flash Fuse bits as shown
below. The clock from the selected source is input to the AVR clock generator, and routed to the
appropriate modules.
Note:
1. For all fuses “1” means unprogrammed while “0” means programmed.
The various choices for each clocking option is given in the following sections. When the CPU
wakes up from Power-down or Power-save, the selected clock source is used to time the start-
up, ensuring stable Oscillator operation before instruction execution starts. When the CPU starts
from reset, there is an additional delay allowing the power to reach a stable level before com-
mencing normal operation. The Watchdog Oscillator is used for timing this real-time part of the
start-up time. The number of WDT Oscillator cycles used for each time-out is shown in Table 8-
2. The frequency of the Watchdog Oscillator is voltage dependent as shown in ”Typical Charac-
8.3
Default Clock Source
The device is shipped with CKSEL = “0010”, SUT = “10”, and CKDIV8 programmed. The default
clock source setting is the Internal RC Oscillator with longest start-up time and an initial system
clock prescaling of 8. This default setting ensures that all users can make their desired clock
source setting using an In-System or Parallel programmer.
Table 8-1.
Device Clocking Options Select
Device Clocking Option
CKSEL3..0
External Crystal/Ceramic Resonator
1111 - 1000
External Low-frequency Crystal
0111 - 0110
Calibrated Internal RC Oscillator
0010
External Clock
0000
Reserved
0011, 0001, 0101, 0100
Table 8-2.
Number of Watchdog Oscillator Cycles
Typ Time-out (V
CC = 5.0V)
Typ Time-out (V
CC = 3.0V)
Number of Cycles
4.1ms
4.3ms
4K (4,096)
65ms
69ms
64K (65,536)
相關PDF資料
PDF描述
TS80C31X2-LJER 8-BIT, 30 MHz, MICROCONTROLLER, PQFP44
TS80C32X2-ELCR 8-BIT, MICROCONTROLLER, PQFP44
TS80C31X2-VJBB 8-BIT, 40 MHz, MICROCONTROLLER, PQCC44
TSC80C31-16KAD 8-BIT, 16 MHz, MICROCONTROLLER, PDIP40
TSC80C31-40JDB 8-BIT, 40 MHz, MICROCONTROLLER, PQFP44
相關代理商/技術參數
參數描述
TSXPC860SRVZQU66D 功能描述:IC MPU POWERQUICC 66MHZ 357PBGA RoHS:否 類別:集成電路 (IC) >> 嵌入式 - 微處理器 系列:- 標準包裝:60 系列:SCC 處理器類型:Z380 特點:全靜電 Z380 CPU 速度:20MHz 電壓:5V 安裝類型:表面貼裝 封裝/外殼:144-LQFP 供應商設備封裝:144-LQFP 包裝:托盤
TSXPCX1031 制造商:Schneider Electric 功能描述:CABLE TO PC SERIAL PORT (SUB-D9) 制造商:Schneider Electric 功能描述:PROGRAMMABLE CABLE 制造商:Schneider Electric 功能描述:MULTI-FUNCTION COMMUNICATION CABLE 制造商:Schneider Electric 功能描述:PROGRAMMABLE CABLE; Accessory Type:Programmable Cable; For Use With:Schneider Non-Ethernet Based Twido PLCs ;RoHS Compliant: Yes 制造商:Schneider Electric 功能描述:Programme cable for twido-nano-micro PLC
TSXPLP01 制造商:Schneider Electric 功能描述:BATTERY FOR TSX 37 制造商:Schneider Electric 功能描述:BATTERY FOR TSX 37 ;ROHS COMPLIANT: YES 制造商:Schneider Electric 功能描述:TSXPLP01 PLC replacement battery
TSXPLP101 制造商:Schneider Electric 功能描述:BATTERY TSX 37 QTY.10, TSXPLP101
TSXPRGLDR 制造商:Schneider Electric 功能描述:PROGRAM LOADER FOR 07/37