參數資料
型號: TSXPC603RVGB/Q14LC
廠商: ATMEL CORP
元件分類: 微控制器/微處理器
英文描述: 32-BIT, 300 MHz, RISC PROCESSOR, CBGA255
封裝: 21 X 21 MM, 3 MM HEIGHT, 1.27 MM PITCH, CERAMIC, BGA-255
文件頁數: 16/83頁
文件大小: 8336K
代理商: TSXPC603RVGB/Q14LC
17
8021G–AVR–03/11
ATmega329P/3290P
Note that the Status Register is not automatically stored when entering an interrupt routine, nor
restored when returning from an interrupt routine. This must be handled by software.
When using the CLI instruction to disable interrupts, the interrupts will be immediately disabled.
No interrupt will be executed after the CLI instruction, even if it occurs simultaneously with the
CLI instruction. The following example shows how this can be used to avoid interrupts during the
timed EEPROM write sequence.
When using the SEI instruction to enable interrupts, the instruction following SEI will be exe-
cuted before any pending interrupts, as shown in this example.
6.8.1
Interrupt Response Time
The interrupt execution response for all the enabled AVR interrupts is four clock cycles mini-
mum. After four clock cycles the program vector address for the actual interrupt handling routine
is executed. During this four clock cycle period, the Program Counter is pushed onto the Stack.
The vector is normally a jump to the interrupt routine, and this jump takes three clock cycles. If
an interrupt occurs during execution of a multi-cycle instruction, this instruction is completed
before the interrupt is served. If an interrupt occurs when the MCU is in sleep mode, the interrupt
execution response time is increased by four clock cycles. This increase comes in addition to the
start-up time from the selected sleep mode.
A return from an interrupt handling routine takes four clock cycles. During these four clock
cycles, the Program Counter (two bytes) is popped back from the Stack, the Stack Pointer is
incremented by two, and the I-bit in SREG is set.
Assembly Code Example
in
r16, SREG
; store SREG value
cli
; disable interrupts during timed sequence
sbi
EECR, EEMWE
; start EEPROM write
sbi
EECR, EEWE
out
SREG, r16
; restore SREG value (I-bit)
C Code Example
char
cSREG;
cSREG = SREG; /* store SREG value */
/* disable interrupts during timed sequence */
__disable_interrupt();
EECR |= (1<<EEMWE); /* start EEPROM write */
EECR |= (1<<EEWE);
SREG = cSREG; /* restore SREG value (I-bit) */
Assembly Code Example
sei
; set Global Interrupt Enable
sleep
; enter sleep, waiting for interrupt
; note: will enter sleep before any pending
; interrupt(s)
C Code Example
__enable_interrupt(); /* set Global Interrupt Enable */
__sleep(); /* enter sleep, waiting for interrupt */
/* note: will enter sleep before any pending interrupt(s) */
相關PDF資料
PDF描述
TS80C31X2-LJER 8-BIT, 30 MHz, MICROCONTROLLER, PQFP44
TS80C32X2-ELCR 8-BIT, MICROCONTROLLER, PQFP44
TS80C31X2-VJBB 8-BIT, 40 MHz, MICROCONTROLLER, PQCC44
TSC80C31-16KAD 8-BIT, 16 MHz, MICROCONTROLLER, PDIP40
TSC80C31-40JDB 8-BIT, 40 MHz, MICROCONTROLLER, PQFP44
相關代理商/技術參數
參數描述
TSXPC860SRVZQU66D 功能描述:IC MPU POWERQUICC 66MHZ 357PBGA RoHS:否 類別:集成電路 (IC) >> 嵌入式 - 微處理器 系列:- 標準包裝:60 系列:SCC 處理器類型:Z380 特點:全靜電 Z380 CPU 速度:20MHz 電壓:5V 安裝類型:表面貼裝 封裝/外殼:144-LQFP 供應商設備封裝:144-LQFP 包裝:托盤
TSXPCX1031 制造商:Schneider Electric 功能描述:CABLE TO PC SERIAL PORT (SUB-D9) 制造商:Schneider Electric 功能描述:PROGRAMMABLE CABLE 制造商:Schneider Electric 功能描述:MULTI-FUNCTION COMMUNICATION CABLE 制造商:Schneider Electric 功能描述:PROGRAMMABLE CABLE; Accessory Type:Programmable Cable; For Use With:Schneider Non-Ethernet Based Twido PLCs ;RoHS Compliant: Yes 制造商:Schneider Electric 功能描述:Programme cable for twido-nano-micro PLC
TSXPLP01 制造商:Schneider Electric 功能描述:BATTERY FOR TSX 37 制造商:Schneider Electric 功能描述:BATTERY FOR TSX 37 ;ROHS COMPLIANT: YES 制造商:Schneider Electric 功能描述:TSXPLP01 PLC replacement battery
TSXPLP101 制造商:Schneider Electric 功能描述:BATTERY TSX 37 QTY.10, TSXPLP101
TSXPRGLDR 制造商:Schneider Electric 功能描述:PROGRAM LOADER FOR 07/37