參數資料
型號: STPD0166BTI3
廠商: 意法半導體
英文描述: PC Compatible Embedded Microprocessor
中文描述: PC兼容嵌入式微處理器
文件頁數: 20/48頁
文件大?。?/td> 762K
代理商: STPD0166BTI3
PIN DESCRIPTION
20/48
Issue 1.7 - February 8, 2000
ISACLK and ISACLKX2 as the input selection
strobes.
DREQ_MUX[1:0]
ISA Bus Multiplexed DMA Re-
quest. These are the ISA bus DMA request sig-
nals. Theyare to be encoded before connection to
the STPC Client using ISACLK and ISACLKX2 as
the input selection strobes.
DACK_ENC[2:0]
DMA Acknowledge. These are
the ISA bus DMA acknowledge signals. They are
encoded by the STPC Client before output and
should be decoded externally using ISACLK and
ISACLKX2 as the control strobes.
TC
ISA Terminal Count.This is the terminal count
output of the DMA controller and is connected to
the TCline of the ISA bus.It isasserted during the
last DMA transfer, when the Byte count expires.
2.2.12. MONITOR INTERFACE
RED, GREEN, BLUE
RGB Video Outputs. These
are the 3 analog color outputs from the RAMDACs
VSYNC
Vertical Synchronization Pulse. This is
the vertical synchronization signal from the VGA
controller.
HSYNC
Horizontal Synchronization Pulse. This is
the horizontal synchronization signal from the
VGA controller.
VREF_DAC
DAC Voltage reference. An external
voltage reference is connected to this pin to bias
the DAC.
RSET
Resistor Current Set. This reference cur-
rent input to the RAMDAC is used to set the full-
scale output of the RAMDAC.
COMP
Compensation. This is the RAMDAC com-
pensation pin. Normally, an external capacitor
(typically 10nF) is connected between this pin and
V
DD
to damp oscillations.
DDC[1:0]
Direct Data Channel Serial Link. These
bidirectional pins are connected to CRTC register
3Fh to implement DDC capabilities. They conform
to I
2
C electrical specifications, they have open-
collector output drivers which are internally con-
nected to V
DD
through pull-up resistors.
They can instead be used for accessing I C devic-
es on board. DDC1 and DDC0 correspond toSCL
and SDA respectively.
2.2.13. MISCELLANEOUS
ST[6],
Reserved.
ST[5]
This is used for speaker output.
ST[4]
Reserved.
ST[3:0]
The pins are for testing the STPC. The
default settings on these pins should be 1111 for
the STPC to function correctly. By setting the
ST[3:0] to 0111, the STPC is tristated.
CLKDEL[2:0]
Reserved The pins are reserved
for Test and Miscellaneous functions)
相關PDF資料
PDF描述
STPCD0175BTC3 PC Compatible Embedded Microprocessor
STPD0175BTC3 PC Compatible Embedded Microprocessor
STPCD0175BTI3 PC Compatible Embedded Microprocessor
STPD0175BTI3 PC Compatible Embedded Microprocessor
STPD0166BTA3 RP15 (F) Series - Powerline Regulated DC-DC Converters; Input Voltage (Vdc): 12V; Output Voltage (Vdc): 3.3V; 2:1 Wide Input Voltage Range; 15 Watts Output Power; 1.6kVDC Isolation; UL Certified; Fixed Operating Frequency; Six-Sided Continuous Shield; Standard 50.8 x25.4x10.2mm Package; Efficiency to 88%
相關代理商/技術參數
參數描述
STPD0175BTA3 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:PC Compatible Embedded Microprocessor
STPD0175BTC3 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:PC Compatible Embedded Microprocessor
STPD0175BTI3 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:PC Compatible Embedded Microprocessor
STP-DRH05 功能描述:烙鐵 Cartridge Hoof 0.5mm (0.02in) RoHS:否 制造商:Weller 產品:Soldering Stations 類型:Digital, Iron, Stand, Cleaner 瓦特:50 W 最大溫度:+ 850 F 電纜類型:US Cord Included
STP-DRH15 功能描述:烙鐵 Cartridge Hoof 1.5mm (0.059in) RoHS:否 制造商:Weller 產品:Soldering Stations 類型:Digital, Iron, Stand, Cleaner 瓦特:50 W 最大溫度:+ 850 F 電纜類型:US Cord Included