參數資料
型號: SI2439-A-FM
廠商: Silicon Laboratories Inc
文件頁數: 15/70頁
文件大小: 0K
描述: IC ISOMODEM 33.6KBPS 38-QFN
標準包裝: 364
系列: *
Si2494/39
22
Rev. 1.0
4.12. V.92 PCM Upstream
The Si2494/39 supports the ITU-V.92 PCM upstream data protocol. This protocol allows the ISOmodem to connect
at speed up to 48 kbps upstream. Previously the upstream connection rate was limited to 33.6 kbps. The PCM
upstream mode is enabled by default; to disable, issue the AT command +PIG = 1 (see Table 10 on page 27). To
view both downstream and upstream connect speeds in the connect result message, issue the command “AT \V4”
or “AT+MR”.
4.13. V.92 Quick Connect
The Si2494/39 supports the ITU-V.92 quick connect protocol. Quick connect enables the modem to save and reuse
line condition parameters to reduce startup negotiation time.
The quick connect feature is enabled by default in the Si2494/39. For information on changing the quick connect
settings, see the +PSS and +PQC commands shown in Table 10 on page 27.
4.14. V.92 Modem-on-Hold
The modem-on-hold (MOH) feature allows the modem user to answer an incoming call while connected online
without dropping the internet connection. The modem will remain “on hold” for a period of time determined by the
host and the ISP. There are four AT commands that control the operation of MOH. The commands are as follows:
+PCW, +PMH, +PMHT, +PMHR. By changing these parameters, the user can enable/disable call waiting and
MOH, set the MOH request timeout, and set the MOH initiate timeout. For further details and syntax on these
commands see Table 10 on page 27. The MOH feature is most useful when the Si2494/39 is connected to a
central office that allows call waiting.
Table 9. V.253 Event Reporting in Voice Mode
Event Description
Reporting
+VLS
Caller Id Report
Complex
0,4,20,21
Distinctive Ringing
Complex
0,4,20,21
RING
R
0,4,20,21
DTMF Received
1-9,A-D,*,#
1,5,20,21
Facsimile Calling (e.g. 1100 Hz)
c
1,5,20,21
Data Calling (e.g. 1300 Hz)
e
1,5,20,21
Presumed End of Message (QUIET) Time-out
q
1,5,20,21
Loop Current Interruption
l
1,5,20,21
Ringing Tone
r
1,5,20,21
BUSY
b
1,5,20,21
DIALTONE
d
1,5,20,21
Extension Phone On-hook
p
0,1,4,5,20,21
Extension Phone Off-hook
P
0,1,4,5,20,21
Facsimile or Data Answer (e.g. 2100 Hz)
a
1,5,20,21
Data Answer (e.g. 2225 Hz)
f
1,5,20,21
相關PDF資料
PDF描述
PIC16C62B/JW IC MCU EPROM 2KX14 PWM 28CDIP
PIC16C57C/JW IC MCU EPROM 2KX12 28CDIP
VI-2NK-IX-F2 CONVERTER MOD DC/DC 40V 75W
PIC16C55A/JW IC MCU EPROM 512X12 28CDIP
VI-2N0-IX-F3 CONVERTER MOD DC/DC 5V 75W
相關代理商/技術參數
參數描述
Si2439-A-FM18-EVB 功能描述:網絡開發工具 38pin Si2439+ Si3018 ISOmodem Eval Board RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V
SI2439-A-FMR 制造商:Silicon Laboratories Inc 功能描述:33.6 KBPS ISOMODEM + VOICE - Tape and Reel 制造商:Silicon Laboratories Inc 功能描述:IC ISOMODEM 33.6KBPS 38-QFN
SI2439-A-GM 功能描述:IC ISOMODEM 33.6KBPS 38-QFN RoHS:是 類別:集成電路 (IC) >> 接口 - 調制解調器 - IC 和模塊 系列:* 標準包裝:25 系列:- 數據格式:V.21,V.22,V.23,V.29,V.32,V.34,V.90,V.92,Bell 103,Bell 212A 波特率:33.6k 電源電壓:3.3V 安裝類型:- 封裝/外殼:- 供應商設備封裝:- 包裝:托盤 配用:591-1013-ND - KIT DEV SOCKETMODEM PARALLEL591-1009-ND - KIT DEV SRL SOCKETMODEM UNIVERSL 其它名稱:MT5656SMI-P-V-34.R2-SPMT5656SMI-P-V-34.R2-SP-NDQ4711574
SI2439-A-GMR 制造商:Silicon Laboratories Inc 功能描述:33.6 KBPS ISOMODEM + VOICE - Tape and Reel 制造商:Silicon Laboratories Inc 功能描述:IC ISOMODEM 33.6KBPS 38-QFN
SI2456 制造商:SILABS 制造商全稱:SILABS 功能描述:V.90, V.34, V.32BIS ISOMODEM⑩ WITH INTEGRATED GLOBAL DAA