參數資料
型號： SC16C754IB80
廠商： NXP SEMICONDUCTORS
元件分類： 微控制器/微處理器
英文描述： Quad UART with 64-byte FIFO
中文描述： 4 CHANNEL(S), 5M bps, SERIAL COMM CONTROLLER, PQFP80
封裝： 12 X 12 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-315-1, LQFP-80
文件頁數： 8/49頁
文件大?。?/td> 622K
代理商： SC16C754IB80
Philips Semiconductors
SC16C754
Quad UART with 64-byte FIFO
Product data
Rev. 04 — 19 June 2003
8 of 49
9397 750 11618
Koninklijke Philips Electronics N.V. 2003. All rights reserved.
6.
Functional description
The SC16C754 UART is pin-compatible with the SC16C554 and SC16C654 UARTs.
It provides more enhanced features. All additional features are provided through a
special enhanced feature register.
The UART will perform serial-to-parallel conversion on data characters received from
peripheral devices or modems, and parallel-to-parallel conversion on data characters
transmitted by the processor. The complete status of each channel of the SC16C754
UART can be read at any time during functional operation by the processor.
The SC16C754 can be placed in an alternate mode (FIFO mode) relieving the
processor of excessive software overhead by buffering received/transmitted
characters. Both the receiver and transmitter FIFOs can store up to 64 bytes
(including three additional bits of error status per byte for the receiver FIFO) and have
selectable or programmable trigger levels. Primary outputs RXRDY and TXRDY allow
signalling of DMA transfers.
The SC16C754 has selectable hardware flow control and software flow control.
Hardware flow control significantly reduces software overhead and increases system
efficiency by automatically controlling serial data flow using the RTS output and CTS
input signals. Software flow control automatically controls data flow by using
programmable Xon/Xoff characters.
The UART includes a programmable baud rate generator that can divide the timing
reference clock input by a divisor between 1 and (2
16
1).
6.1 Trigger levels
The SC16C754 provides independent selectable and programmable trigger levels for
both receiver and transmitter DMA and interrupt generation. After reset, both
transmitter and receiver FIFOs are disabled and so, in effect, the trigger level is the
default value of one byte. The selectable trigger levels are available via the FCR. The
programmable trigger levels are available via the TLR.
6.2 Hardware flow control
Hardware flow control is comprised of Auto-CTS and Auto-RTS. Auto-CTS and
Auto-RTS can be enabled/disabled independently by programming EFR[7:6].
V
CC
6, 46, 66 13, 47,
64
35
I
Power supply input.
XTAL1
31
I
Crystal or external clock input.
Functions as a crystal input or as an
external clock input. A crystal can be connected between XTAL1 and XTAL2
to form an internal oscillator circuit (see
Figure 13
). Alternatively, an
external clock can be connected to this pin to provide custom data rates.
Output of the crystal oscillator or buffered clock.
(See also XTAL1.)
XTAL2 is used as a crystal oscillator output or a buffered clock output.
XTAL2
32
36
O
Table 2:
Symbol
Pin description
…continued
Pin
LQFP80 PLCC68
Type
Description
相關PDF資料
PDF描述
SC2000 Universal Timeslot Interchange
SC2001G-10 Bus Exchanger
SC2001G-13 Bus Exchanger
SC2344 BJT
SC26C94 Quad universal asynchronous receiver/transmitter QUART
相關代理商/技術參數
參數描述
SC16C754IB80,528 功能描述:UART 接口集成電路 16C 2.5V-5V 4CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C754IB80,551 功能描述:UART 接口集成電路 16C 2.5V-5V 4CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C754IB80,557 功能描述:UART 接口集成電路 16C 2.5V-5V 4CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C850 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:2.5 V to 3.3 V UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA), and 16 mode or 68 mode parallel bus interface
SC16C850IBS 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:2.5 V to 3.3 V UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA), and 16 mode or 68 mode parallel bus interface
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*