參數資料
型號： SAA5288PS
廠商： NXP Semiconductors N.V.
英文描述： TV microcontroller with full screen On Screen Display OSD
中文描述： 微控制器與電視屏幕顯示OSD全屏
文件頁數： 27/48頁
文件大?。?/td> 508K
代理商： SAA5288PS
1997 Jun 24
27
Philips Semiconductors
Preliminary specification
TV microcontroller with full screen
On Screen Display (OSD)
SAA5288
7.10
Other display features
Setting the TXT7.DOUBLE HEIGHT bit causes the normal
height of all display characters to be doubled and the
whole of the display area to be occupied by half of the
display rows. Characters normally displayed double height
will be displayed quadruple height when this bit is set.
Rows 12 to 24 can be enlarged, rather than rows 0 to 11,
by setting the TXT7.TOP/BOTTOM bit.
This feature can be used for either a user controlled
‘enlarge’ facility or to provide very large characters for the
OSD.
The display of rows 0 to 23 can be disabled by setting the
TXT0.DISPLAY STATUS ROW ONLY bit.
The Fastext prompt row (packet 24) can be displayed from
the extension packet memory by setting the
TXT0.DISPLAY X/24 bit. When this bit is set the data
displayed on display row 24 is taken from row 0 in the
extension packet memory.
When the display from extension packet block option is
enabled, the display will revert to row 24 of the basic page
memory if bit 3 of the link control byte in packet 27 is set.
7.11
Display timing
The display synchronises to the device’s HSync and
VSync inputs. A typical configuration is shown in Fig.7.
The HSync and VSync signals are derived from the signals
driving the deflection coils of the TV. Locking the display to
the signals from the scan circuits allows the device to give
a stable display under almost all signal conditions.
The polarity of the input signals which the device is
expecting can be set using the TXT1.H polarity and
TXT1.V polarity bits. If the polarity bit is a logic 0, a positive
going signal is expected and if it is a logic 1, a negative
going signal is expected.
7.12
Horizontal timing
Every time an HSync pulse is received the display
resynchronizes to its leading edge. To get maximum
display stability, the HSync input must have fast edges,
free of noise to ensure that there is no uncertainty in the
timing of the signal to which the display synchronisation
circuits must lock.
The display area starts 17.2
μ
s into the line and lasts for
40
μ
s. The display area will be in the centre of the screen
if the HSync pulse is aligned with line flyback signal.
Therefore, it is better to derive HSync directly from the line
flyback or from an output of the line output transformer
than from, say, slicing the sandcastle signal as this would
introduce delays which would shift the display to the right.
Fig.7 Timing configuration.
handbook, halfpage
VIDEO
DECODING
TUNER/IF
RGB, VDS
FRAME
RGB
MGL120
HSYNC, VSYNC
SYNC
CIRCUITS
SAA5288
CRT
DISPLAY
相關PDF資料
PDF描述
SAA5290 One page Economy Teletext/TV microcontroller
SAA5290A Economy teletext and TV microcontrollers
SAA5290PS Economy teletext and TV microcontrollers
SAA5290ZP One page Economy Teletext/TV microcontroller
SAA5291PS Economy teletext and TV microcontrollers(經濟的圖文電視和TV控制器)
相關代理商/技術參數
參數描述
SAA5290 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Economy teletext and TV microcontrollers
SAA5290A 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Economy teletext and TV microcontrollers
SAA5290PS 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Economy teletext and TV microcontrollers
SAA5290ZP 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:One page Economy Teletext/TV microcontroller
SAA5290ZP/NV 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:One page Economy Teletext/TV microcontroller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*