參數資料
型號: SA7026DH
廠商: NXP SEMICONDUCTORS
元件分類: XO, clock
英文描述: 1.3GHz low voltage fractional-N dual frequency synthesizer
中文描述: PLL FREQUENCY SYNTHESIZER, 1300 MHz, PDSO20
封裝: 4.40 MM, PLASTIC, SOT-360-1, TSSOP-20
文件頁數: 9/18頁
文件大?。?/td> 299K
代理商: SA7026DH
Philips Semiconductors
Product specification
SA7026
1.3GHz low voltage fractional-N dual synthesizer
1999 Nov 04
9
Main Output Charge Pumps and Fractional
Compensation Currents (see Figure 6)
The main charge pumps on pins PHP and PHI are driven by the
main phase detector and the charge pump current values are
determined by the current at pin R
SET
in conjunction with bits CP0,
CP1 in the C-word (see table of charge pump ratios). The fractional
compensation is derived from the current at R
SET
, the contents of
the fractional accumulator FRD and by the program value of the
FDAC. The timing for the fractional compensation is derived from
the main divider. The main charge pumps will enter speed up mode
after the A-word is set and strobe goes High. When strobe goes
Low, charge pump will exit speed up mode.
Principle of Fractional Compensation
The fractional compensation is designed into the circuit as a means
of reducing or eliminating fractional spurs that are caused by the
fractional phase ripple of the main divider. If I
COMP
is the
compensation current and I
PUMP
is the pump current, then for each
charge pump:
I
PUMP_TOTAL
= I
PUMP
+ I
COMP
.
The compensation is done by sourcing a small current, I
COMP
, see
Figure 7, that is proportional to the fractional error phase. For proper
fractional compensation, the area of the fractional compensation
current pulse must be equal to the area of the fractional charge
pump ripple. The width of the fractional compensation pulse is fixed
to 128 VCO cycles, the amplitude is proportional to the fractional
accumulator value and is adjusted by FDAC values (bits FC7–0 in
the B-word). The fractional compensation current is derived from the
main charge pump in that it follows all the current scaling through
external resistor setting, R
SET
, programming or speed-up operation.
For a given charge pump,
I
COMP
= ( I
PUMP
/ 128 ) * ( FDAC / 5*128) * FRD
FRD is the fractional accumulator value.
The target values for FDAC are: 128 for FMOD = 1 (modulo 5) and
80 for FMOD = 0 (modulo 8).
SR01416
REFERENCE R
MAIN M
DIVIDE RATIO
DETECTOR
OUTPUT
ACCUMULATOR
FRACTIONAL
COMPENSATION
CURRENT
OUTPUT ON
PUMP
N
N
N+1
N
N+1
2
4
1
3
0
PULSE
WIDTH
MODULATION
PULSE LEVEL
MODULATION
mA
μ
A
NOTE:
For a proper fractional compensation, the area of the fractional compensation current pulse must be equal to the area of the charge pump ripple output.
Figure 6.
Waveforms for NF = 2 Modulo 5
fraction =
2
/
5
SR01800
f
RF
MAIN DIVIDER
FRACTIONAL
ACCUMULATOR
f
REF
I
COMP
I
PUMP
LOOP FILTER
& VCO
Σ
Figure 7.
Current Injection Concept
相關PDF資料
PDF描述
SA702 Divide by: 64/65/72 triple modulus low power ECL prescaler
SA702D Divide by: 64/65/72 triple modulus low power ECL prescaler
SA702N Divide by: 64/65/72 triple modulus low power ECL prescaler
SA702 SILICON GATE ENHANCEMENT MODE RF POWER VDMOS TRANSISTOR
SA741C General purpose operational amplifier
相關代理商/技術參數
參數描述
SA702D 制造商:NXP Semiconductors 功能描述: 制造商: 功能描述: 制造商:undefined 功能描述:
SA702N 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Divide by: 64/65/72 triple modulus low power ECL prescaler
SA703 制造商:Datak Corporation 功能描述:Precision ScrewDriver Set
SA-7030A 功能描述:BCD 10-POSITION SMD J-HOOK RoHS:是 類別:開關 >> DIP 系列:SA-7000 特色產品:RDM Series Rotary DIP Switch 標準包裝:70 系列:RDM 電路:十六進制 位置數:16 觸點額定電壓:0.1A @ 42VDC 觸動器類型:用于工具旋轉 觸動器電平:凹槽式 安裝類型:通孔 方向:頂部觸動 可清洗:是 其它名稱:EG4977-5RDMAR16PIT
SA-7030B 功能描述:BCD 10-POSITION SMD GULL-WING RoHS:是 類別:開關 >> DIP 系列:SA-7000 特色產品:RDM Series Rotary DIP Switch 標準包裝:70 系列:RDM 電路:十六進制 位置數:16 觸點額定電壓:0.1A @ 42VDC 觸動器類型:用于工具旋轉 觸動器電平:凹槽式 安裝類型:通孔 方向:頂部觸動 可清洗:是 其它名稱:EG4977-5RDMAR16PIT