參數資料
型號： R2051K01
廠商： RICOH COMPANY LTD
元件分類： 時鐘/數據恢復及定時提取
英文描述： 0 TIMER(S), REAL TIME CLOCK, QCC12
封裝： 2 X 2 MM, 0.85 MM PITCH, ULTRA-COMPACT, FFP, 12 PIN
文件頁數： 22/53頁
文件大?。?/td> 343K
代理商： R2051K01
R2051 Series
12345
Rev.1.04
- 29 -
l
Data Transmission under Special Condition
The R2051 holds the clock tentatively for duration from Start Condition to avoid invalid read or write clock on
carrying clock. When clock carried during this period, which will be adjusted within approx. 61
s from Stop
Condition. To prevent invalid read or write, clock and calendar data shall be made during one transmission
operation (from Start Condition to Stop Condition). When 0.5 to 1.0 second elapses after Start Condition, any
access to the R2051 is automatically released to release tentative hold of the clock, and access from the CPU
is forced to be terminated (The same action as made Stop Condition is received: automatic resume function
from I
2C-Bus interface). Therefore, one access must be complete within 0.5 seconds. The automatic resume
function prevents delay in clock even if SCL is stopped from sudden failure of the system during clock read
operation.
Also a second Start Condition after the first Start Condition and before the Stop Condition is regarded
“Repeated Start Condition”.
Therefore, when 0.5 to 1.0 seconds passed after the first Start Condition, an
access to the R2051 is automatically released.
If access is tried after automatic resume function is activated, no acknowledge signal will be output for writing
while FFh will be output for reading.
The user shall always be able to access the real-time clock as long as three conditions are met.
(1) No Stop Condition shall be generated until clock and calendar data read/write is started and completed.
(2) One cycle read/write operation shall be complete within 0.5 seconds.
(3) Do not make Start Condition within 61
s from Stop Condition. When clock is carried during the access,
which will be adjusted within approx. 61
s from Stop Condition.
Bad example of reading from seconds to hours (invalid read)
(Start Condition)
→ (Read of seconds) → (Read of minutes) → (Stop Condition) → (Start Condition) → (Read
of hour)
→ (Stop Condition)
Assuming read was started at 05:59:59 P.M. and while reading seconds and minutes the time advanced to
06:00:00 P.M. At this time second digit is hold so read the read as 05:59:59. Then the R2051 confirms (Stop
Condition) and carries second digit being hold and the time change to 06:00:00 P.M. Then, when the hour digit
is read, it changes to 6. The wrong results of 06:59:59 will be read.
相關PDF資料
PDF描述
R3F10031NSP FLASH, 8 MHz, MICROCONTROLLER, PDSO24
R3F10011NSP FLASH, 8 MHz, MICROCONTROLLER, PDSO20
R3F10011NXXXSP MROM, 8 MHz, MICROCONTROLLER, PDSO20
R42181 SINGLE COLOR LED, RED, 5.6 mm
R42182 SINGLE COLOR LED, RED, 5.6 mm
相關代理商/技術參數
參數描述
R2051K01-E2 制造商:RICOH 制造商全稱:RICOH electronics devices division 功能描述:2 wire interface Real-Time Clock ICs with Battery Backup switch-over Function
R2051K02-E2 制造商:RICOH 制造商全稱:RICOH electronics devices division 功能描述:2 wire interface Real-Time Clock ICs with Battery Backup switch-over Function
R2051S01-E2 制造商:RICOH 制造商全稱:RICOH electronics devices division 功能描述:2 wire interface Real-Time Clock ICs with Battery Backup switch-over Function
R2051S02-E2 制造商:RICOH 制造商全稱:RICOH electronics devices division 功能描述:2 wire interface Real-Time Clock ICs with Battery Backup switch-over Function
R2051S03-E2 制造商:RICOH 制造商全稱:RICOH electronics devices division 功能描述:2 wire interface Real-Time Clock ICs with Battery Backup switch-over Function
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*