參數資料
型號: P89CE558EBB
廠商: NXP SEMICONDUCTORS
元件分類: 微控制器/微處理器
英文描述: Single-chip 8-bit microcontroller
中文描述: 8-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP80
文件頁數: 22/72頁
文件大?。?/td> 721K
代理商: P89CE558EBB
Philips Semiconductors
Preliminary specification
P83CE558/P80CE558/P89CE558
Single-chip 8-bit microcontroller
1996 Aug 06
22
When Timer 0 is in Mode 3, Timer 1 can be programmed to operate
in Modes 0, 1 or 2 but cannot set an interrupt request flag or
generate an interrupt. However the overflow from Timer 1 can be
used to pulse the serial port baud-rate generator.
With a 16 MHz crystal, the counting frequency of these
timer/counters is as follows:
In the timer function, the timer is incremented at a frequency of
1.33 MHz – a division by 12 of the system clock frequency
0 Hz to an upper limit of 0.66 MHz (1/24 of the system clock
frequency) when programmed for external inputs
Both internal and external inputs can be gated to the counter by a
second external source for directly measuring pulse durations.
When configured as a counter, the register is incremented on every
falling edge on the corresponding input pin, T0 or T1. The
incremented register value can be read earliest during the second
machine cycle after that one, during which the incrementing pulse
occurred.
The counters are started and stopped under software control. Each
one sets its interrupt request flag when it overflows from all HIGHs
to all LOWs (or automatic reload value), with the exception of mode
3 as previously described.
Figure 19. Timer/Counter mode control (TMOD) register.
7
6
5
4
3
2
1
0
TMOD (89H)
GATE
C/T
M1
M0
GATE
C/T
M1
M0
Timer 1
Timer 0
Table 12.
Description of TMOD bits
SYMBOL
BIT
FUNCTION
Gate
TMOD.7
TMOD.3
Gating control when set. Timer/Counter “x” is enabled only while “INTx” pin is high and “TRx” control pin is set.
When cleared Timer “x” is enabled whenever “TRx” control bit is set.
C/T
TMOD.6
TMOD.2
Timer or Counter Selector cleared for Timer operation (input from internal system clock). Set for Counter
operation (input from “Tx” input pin).
M1
M0
TMOD.5
TMOD.1
TMOD.4
TMOD.0
Timer 0, Timer 1 mode select see Table 13.
Table 13.
Timer 0 / Timer 1 operation select
M1
M0
OPERATING
0
0
8048 Timer “TLx” serves as 5-bit prescaler.
0
1
16-bit Timer/Counter “THx” and “TLx” are cascaded; there is no prescaler.
1
0
8-bit auto-reload Timer/Counter “THx” holds a value which is to be reloaded into “TLx” each time it overflows.
1
1
(Timer 0) TL0 is an 8-bit Timer/Counter controlled by the standard Timer 0 control bits. TH0 is an 8-bit timer
only controlled by Timer 1 control bits.
1
1
(Timer 1) Timer/Counter 1 stopped.
相關PDF資料
PDF描述
P89CE558EFB Single-chip 8-bit microcontroller
P80CE558 Single-chip 8-bit microcontroller(8位單片微控制器)
P80CE558EBB Single-chip 8-bit microcontroller
P80CE558EFB Single-chip 8-bit microcontroller
P89LPC901 8-bit microcontrollers with two-clock 80C51 core 1 kB 3 V Flash with 128-byte RAM
相關代理商/技術參數
參數描述
P89CE558EFB 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Single-chip 8-bit microcontroller
P89CV51RB2 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:8-bit 80C51 5 V low power 64 kB flash microcontroller with 1 kB RAM, SPI, 6-clock CPU with 6/12-clock peripherals
P89CV51RB2_09 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:8-bit 80C51 5 V low power 64 kB flash microcontroller with 1 kB RAM, SPI, 6-clock CPU with 6/12-clock peripherals
P89CV51RB2BBC,557 制造商:NXP Semiconductors 功能描述:
P89CV51RB2FA 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:8-bit 80C51 5 V low power 64 kB flash microcontroller with 1 kB RAM, SPI, 6-clock CPU with 6/12-clock peripherals