參數資料
型號: MR83C154TXXX-20P883D
廠商: ATMEL CORP
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 20 MHz, MICROCONTROLLER, CQCC44
封裝: LCC-44
文件頁數: 8/81頁
文件大?。?/td> 663K
代理商: MR83C154TXXX-20P883D
16
ATtiny28L/V
1062F–AVR–07/06
Note:
1. Due to limited number of clock cycles in the start-up period, it is recommended that
ceramic resonator be used.
This table shows the start-up times from reset. From Power-down mode, only the clock
counting part of the start-up time is used. The Watchdog oscillator is used for timing the
real-time part of the start-up time. The number WDT oscillator cycles used for each
time-out is shown in Table 6.
The frequency of the Watchdog oscillator is voltage-dependent, as shown in the section
The device is shipped with CKSEL = 0010.
Power-on Reset
A Power-on Reset (POR) pulse is generated by an on-chip detection circuit. The detec-
tion level is nominally 1.4V. The POR is activated whenever V
CC is below the detection
level. The POR circuit can be used to trigger the start-up reset, as well as detect a fail-
ure in supply voltage.
The Power-on Reset (POR) circuit ensures that the device is reset from power-on.
Reaching the Power-on Reset threshold voltage invokes a delay counter, which deter-
mines the delay for which the device is kept in RESET after V
CC rise. The time-out
period of the delay counter can be defined by the user through the CKSEL fuses. The
different selections for the delay period are presented in Table 5. The RESET signal is
Table 5. ATtiny28 Clock Options and Start-up Time
CKSEL3..0
Clock Source
Start-up Time at 2.7V
1111
External Crystal/Ceramic Resonator(1)
1K CK
1110
External Crystal/Ceramic Resonator(1)
4.2 ms + 1K CK
1101
External Crystal/Ceramic Resonator(1)
67 ms + 1K CK
1100
External Crystal/Ceramic Resonator
16K CK
1011
External Crystal/Ceramic Resonator
4.2 ms + 16K CK
1010
External Crystal/Ceramic Resonator
67 ms + 16K CK
1001
External Low-frequency Crystal
67 ms + 1K CK
1000
External Low-frequency Crystal
67 ms + 32K CK
0111
External RC Oscillator
6 CK
0110
External RC Oscillator
4.2 ms + 6 CK
0101
External RC Oscillator
67 ms + 6 CK
0100
Internal RC Oscillator
6 CK
0011
Internal RC Oscillator
4.2 ms + 6 CK
0010
Internal RC Oscillator
67 ms + 6 CK
0001
External Clock
6 CK
0000
External Clock
4.2 ms + 6 CK
Table 6. Number of Watchdog Oscillator Cycles
Time-out
Number of Cycles
4.2 ms
1K
67 ms
16K
相關PDF資料
PDF描述
MQ80C52TXXX-20:D 8-BIT, MROM, 20 MHz, MICROCONTROLLER, CQFP44
MR80C32-20/883:RD 8-BIT, 20 MHz, MICROCONTROLLER, CQCC44
MR80C32-16/883R 8-BIT, 16 MHz, MICROCONTROLLER, CQCC44
MC80C52CXXX-30P883 8-BIT, MROM, 30 MHz, MICROCONTROLLER, CDIP40
MR80C32-20/883:RD 8-BIT, 20 MHz, MICROCONTROLLER, CQCC44
相關代理商/技術參數
參數描述
MR850 功能描述:整流器 3.0 Amp 50 Volt 150ns RoHS:否 制造商:Vishay Semiconductors 產品:Standard Recovery Rectifiers 配置: 反向電壓:100 V 正向電壓下降: 恢復時間:1.2 us 正向連續電流:2 A 最大浪涌電流:35 A 反向電流 IR:5 uA 安裝風格:SMD/SMT 封裝 / 箱體:DO-221AC 封裝:Reel
MR850 _AY _10001 制造商:PanJit Touch Screens 功能描述:
MR850 R0 制造商:SKMI/Taiwan 功能描述:Diode Switching 50V 3A 2-Pin DO-201AD T/R
MR850_ R2 _10001 制造商:PanJit Touch Screens 功能描述:
MR850_09 制造商:PANJIT 制造商全稱:Pan Jit International Inc. 功能描述:SOFT RECOVERY, FAST SWITCHING PLASTIC RECTIFIER