82
8111C–MCU Wireless–09/09
AT86RF231
Bit 6:
the "Intra-PAN" subfield indicates that in a frame, where both, the destination and source
addresses are present, the PAN-ID of the source address field is omitted. In RX_AACK mode,
this bit is evaluated by the address filter logic of the AT86RF231.
Bit [11:10]:
the "Destination Addressing Mode" subfield describes the format of the destination address of
to IEEE 802.15.4.
If the destination address mode is either 2 or 3 (i.e. if the destination address is present), it
always consists of a 16-bit PAN ID first, followed by either the 16-bit or 64-bit address as
described by the mode.
Bit [13:12]:
the "Frame Version" subfield specifies the version number corresponding to the frame. These
register bits are reserved in IEEE 802.15.4-2003.
This subfield shall be set to 0 to indicate a frame compatible with IEEE 802.15.4-2003 and 1 to
indicate an IEEE 802.15.4-2006 frame. All other subfield values shall be reserved for future use.
RX_AACK register bit AACK_FVN_MODE (register 0x2E, CSMA_SEED_1) controls the behav-
ior of frame acknowledgements. This register determines if, depending on the Frame Version
Number, a frame is acknowledged or not. This is necessary for backward compatibility to IEEE
802.15.4-2003 and for future use. Even if frame version numbers 2 and 3 are reserved, it can be
See IEEE 802.15.4-2006, section 7.2.3 for details on frame compatibility.
Table 8-3.
Frame Control Field - Destination and Source Addressing Mode
Frame Control Field Bit Assignments
Description
Addressing Mode
b11 b10
b
15 b14
Value
00
0
PAN identifier and address fields are not present
01
1
Reserved
10
2
Address field contains a 16-bit short address
11
3
Address field contains a 64-bit extended address
Table 8-4.
Frame Control Field - Frame Version Subfield
Frame Control Field Bit Assignments
Description
Frame Version
b13 b12
Value
00
0
Frames are compatible with IEEE 802.15.4 2003
01
1
Frames are compatible with IEEE 802.15.4-2006
10
2
Reserved
11
3
Reserved