MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order Number: MPC972/D
Rev 6, 09/2001
MOTOROLA ADVANCED CLOCK DRIVERS DEVICE DATA
186
Low Voltage PLL Clock
Driver
The MPC972 is a 3.3 V compatible, PLL based clock driver device
targeted for high performance CISC or RISC processor based systems.
With output frequencies of up to 125 MHz and skews of 550 ps the
MPC972 is ideally suited for most synchronous systems. The device
offers twelve low skew outputs plus a feedback and sync output for added
flexibility and ease of system implementation.
Fully Integrated PLL
Output Frequency up to 125 MHz
Compatible with PowerPC and Pentium Microprocessors
LQFP Packaging
3.3 V VCC
± 100 ps Typical Cycle–to–Cycle Jitter
The MPC972 features an extensive level of frequency programmability
between the 12 outputs as well as the input vs output relationships. Using
the select lines output frequency ratios of 1:1, 2:1, 3:1, 3:2, 4:1, 4:3, 5:1,
5:2, 5:3, 6:1 and 6:5 between outputs can be realized by pulsing low one
clock edge prior to the coincident edges of the Qa and Qc outputs. The
Sync output will indicate when the coincident rising edges of the above
relationships will occur. The selectability of the feedback frequency is
independent of the output frequencies, this allows for very flexible
programming of the input reference vs output frequency relationship. The
output frequencies can be either odd or even multiples of the input
reference. In addition the output frequency can be less than the input
frequency for applications where a frequency needs to be reduced by a
non–binary factor. The Power–On Reset ensures proper programming if
the frequency select pins are set at power up. If the fselFB2 pin is held
high, it may be necessary to apply a reset after power–up to ensure
synchronization between the QFB output and the other outputs. The
internal power–on reset is designed to provide this function, but with
power–up conditions being dependent, it is difficult to guarantee. All other
conditions of the fsel pins will automatically synchronize during PLL lock
acquisition.
The MPC972 offers a very flexible output enable/disable scheme. This enable/disable scheme helps facilitate system debug
as well as provide unique opportunities for system power down schemes to meet the requirements of “green” class machines.
The MPC972 allows for the enabling of each output independently via a serial input port. When disabled or “frozen” the outputs
will be locked in the “LOW” state, however the internal state machines will continue to run. Therefore when “unfrozen” the out-
puts will activate synchronous and in phase with those outputs which were not frozen. The freezing and unfreezing of outputs
occurs only when they are already in the “LOW” state, thus the possibility of runt pulse generation is eliminated. A power-on
reset will ensure that upon power up all of the outputs will be active. Note that all of the control inputs on the MPC972 have
internal pull–up resistors.
The MPC972 is fully 3.3 V compatible and requires no external loop filter components. All inputs accept LVCMOS/LVTTL
compatible levels while the outputs provide LVCMOS levels with the capability to drive 50
transmission lines. For series termi-
nated lines each MPC972 output can drive two 50
lines in parallel thus effectively doubling the fanout of the device.
The MPC972 can consume significant power in some configurations. Users are encouraged to review Application Note
AN1545/D in the Advanced Clock Drivers Device Data book (DL207/D) for a discussion on the thermal issues with the MPC
family of clock drivers.
PowerPC is a trademark of International Business Machines Corporation. Pentium is a trademark of Intel Corporation.
Rev 6
2
MPC972
LOW VOLTAGE
PLL CLOCK DRIVER
FA SUFFIX
52–LEAD LQFP PACKAGE
CASE 848D-03
SCALE 2:1
See Upgrade Product – MPC9772
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
..
.