![](http://datasheet.mmic.net.cn/90000/MPC5606SVMG6_datasheet_3507981/MPC5606SVMG6_21.png)
Overview
MPC560xS Microcontroller Data Sheet, Rev. 5
Preliminary—Subject to Change Without Notice
Freescale Semiconductor
21
— 8-bit mono
— 8-bit color multiplexed
—RGB565
— 16-bit/18-bit RAW color
Supported synchronization modes:
— Embedded ITU-R BT.656-4 (RGB565 mode 2)
— HSYNC, VSYNC
— Data Enable
Direct interface with DCU background plane FIFO
Synchronization generation for the DCU
1.6.26
Liquid Crystal Display (LCD) driver
The LCD driver module has two configurations allowing a maximum of 160 or 228 LCD segments:
Up to 40 frontplane drivers and 4 backplane drivers
Up to 38 frontplane drivers and 6 backplane drivers
Each segment is controlled and can be masked by a corresponding bit in the LCD RAM.
Four to six multiplex modes (1/1, 1/2, 1/3, 1/4, 1/5, 1/6 duty), and three bias (1/1, 1/2, 1/3) methods are available. All frontplane
and backplane pins can be multiplexed with other port functions.
The LCD driver module features the following:
Programmable frame clock generator from different clock sources:
— System clock
— Internal RC oscillator
Programmable bias voltage level selector
On-chip generation of all output voltage levels
— LCD voltage reference taken from main 5V supply
LCD RAM – contains the data to be displayed on the LCD
— Data can be read from or written to the display RAM at any time
End of Frame interrupt:
— To optimize the refresh of the data without visual artefact
— Selectable number of frames between each interrupt
Contrast adjustment using programmable internal voltage reference
Remapping capability of 4 or 6 backplanes with frontplanes;
— To increase pin selection flexibility
In low power modes, the LCD operation can be suspended under software control. The LCD can also operate in low
power modes, clocked by the internal 128 kHz IRC or external 32 KHz crystal oscillator
Selectable output current boost during transitions
1.6.27
Stepper Motor Controller (SMC)
The SMC module is a PWM motor controller suitable to drive instruments in a cluster configuration or any other loads requiring
a PWM signal. The motor controller has twelve PWM channels associated with two pins each (24 pins in total).
The SMC module includes the following features:
10/11-bit PWM counter
11-bit resolution with selectable PWM dithering function
Because
of
an
order
from
the
United
States
International
Trade
Commission,
BGA-packaged
product
lines
and
part
numbers
indicated
here
currently
are
not
available
from
Freescale
for
import
or
sale
in
the
United
States
prior
to
September
2010:
MPC5606S
products
in
208
MAPBGA
packages