62
MPC7455 RISC Microprocessor Hardware Specifications
MOTOROLA
Ordering Information
1.11 Ordering Information
Ordering information for the parts fully covered by this specification document is provided in
Section 1.11.1, “Part Numbers Fully Addressed by This Document.” Note that the individual part numbers
correspond to a maximum processor core frequency. For available frequencies, contact your local Motorola
sales office. In addition to the processor frequency, the part numbering scheme also includes an application
modifier which may specify special application conditions. Each part number also contains a revision level
code which refers to the die mask revision number. Section 1.11.2, “Part Numbers Not Fully Addressed by
This Document,” lists the part numbers which do not fully conform to the specifications of this document.
These special part numbers require an additional document called a part number specification.
1.11.1 Part Numbers Fully Addressed by This Document
Table 21 provides the Motorola part numbering nomenclature for the MPC7455.
1.11.2 Part Numbers Not Fully Addressed by This Document
Parts with application modifiers or revision levels not fully addressed in this specification document are
described in separate part number specifications which supplement and supersede this document; see
Table 22 through Table 25.
Table 21. Part Numbering Nomenclature
xx
74x5
x
RX
nnnn
x
Product
Code
Part
Identifier
Process
Descriptor
Package
Processor
Frequency 1
Application
Modifier
Revision Level
XC 2
7455
7445
A
RX = CBGA
733
867
933
1000
L: 1.3 V ± 50 mV
0 to 105
°C
F: 3.3; PVR = 8001 0303
MC
G: 3.4; PVR = 8001 0304
Notes:
1. Processor core frequencies supported by parts addressed by this specification only. Parts addressed by part
number specifications may support other maximum core frequencies.
2. The X prefix in a Motorola part number designates a “Pilot Production Prototype” as defined by Motorola SOP
3-13. These are from a limited production volume of prototypes manufactured, tested, and Q.A. inspected on a
qualified technology to simulate normal production. These parts have only preliminary reliability and
characterization data. Before pilot production prototypes may be shipped, written authorization from the customer
must be on file in the applicable sales office acknowledging the qualification status and the fact that product
changes may still occur while shipping pilot production prototypes.
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
..
.