參數資料
型號: MC68HC11D0CFB
廠商: MOTOROLA INC
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MICROCONTROLLER, PQFP44
封裝: 10 X 10 MM, QFP-44
文件頁數: 45/124頁
文件大小: 1481K
代理商: MC68HC11D0CFB
MC68HC11D3
CENTRAL PROCESSING UNIT
MOTOROLA
TECHNICAL DATA
3-7
to proceed. The effective address can be specified within an instruction, or it can be
calculated.
3.4.1 Immediate
In the immediate addressing mode an argument is contained in the byte(s) immediate-
ly following the opcode. The number of bytes following the opcode matches the size
of the register or memory location being operated on. There are two-, three-, and four-
(if prebyte is required) byte immediate instructions. The effective address is the ad-
dress of the byte following the instruction.
3.4.2 Direct
In the direct addressing mode, the low-order byte of the operand address is contained
in a single byte following the opcode, and the high-order byte of the address is as-
sumed to be $00. Addresses $00–$FF are thus accessed directly, using two-byte in-
structions. Execution time is reduced by eliminating the additional memory access
required for the high-order address byte. In most applications, this 256-byte area is re-
served for frequently referenced data. In M68HC11 MCUs, the memory map can be
configured for combinations of internal registers, RAM or external memory to occupy
these addresses.
3.4.2.1 Extended
In the extended addressing mode, the effective address of the argument is contained
in two bytes following the opcode byte. These are three-byte instructions (or four-byte
instructions if a prebyte is required). One or two bytes are needed for the opcode and
two for the effective address.
3.4.2.2 Indexed
In the indexed addressing mode, an 8-bit unsigned offset contained in the instruction
is added to the value contained in an index register (IX or IY) — the sum is the effective
address. This addressing mode allows referencing any memory location in the 64
Kbyte address space. These are from two- to five-byte instructions, depending on
whether or not a prebyte is required.
3.4.2.3 Inherent
In the inherent addressing mode, all the information necessary to execute the instruc-
tion is contained in the opcode. Operations that use only the index registers or accu-
mulators, as well as control instructions with no arguments, are included in this
addressing mode. These are one- or two-byte instructions.
3.4.2.4 Relative
The relative addressing mode is used only for branch instructions. If the branch con-
dition is true, an 8-bit signed offset included in the instruction is added to the contents
of the program counter to form the effective branch address. Otherwise, control pro-
ceeds to the next instruction. These are usually two-byte instructions.
相關PDF資料
PDF描述
MC68HC11D0CP2 8-BIT, MROM, 2 MHz, MICROCONTROLLER, PDIP40
MC68HC11D0CP2 8-BIT, MROM, 2 MHz, MICROCONTROLLER, PDIP40
MC68HC11D0CP 8-BIT, MICROCONTROLLER, PDIP40
MC68HC11L6CFU1 8-BIT, OTPROM, 1 MHz, MICROCONTROLLER, PQFP64
MC68HC16S2CPU25 16-BIT, 25.17 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
MC68HC11D0CFB2 制造商:Rochester Electronics LLC 功能描述:8BIT MCU,192 BYTES RAM - Bulk 制造商:Freescale Semiconductor 功能描述: 制造商:Motorola Inc 功能描述: 制造商:MOTOROLA 功能描述:
MC68HC11D0CFB3 制造商:Motorola Inc 功能描述: 制造商:MOTOROLA 功能描述:
MC68HC11D0CFB3R2 制造商:Rochester Electronics LLC 功能描述:- Bulk
MC68HC11D0CFBE2 功能描述:8位微控制器 -MCU 8B MCU 192 BYTES RAM RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
MC68HC11D0CFBE3 功能描述:8位微控制器 -MCU 8B MCU 192RAM 3 MHZ RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT