參數資料
型號: MC68HC11D0CFB
廠商: MOTOROLA INC
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MICROCONTROLLER, PQFP44
封裝: 10 X 10 MM, QFP-44
文件頁數: 40/124頁
文件大小: 1481K
代理商: MC68HC11D0CFB
MOTOROLA
CENTRAL PROCESSING UNIT
MC68HC11D3
3-2
TECHNICAL DATA
3.1.1 Accumulators A, B, and D
Accumulators A and B are general-purpose 8-bit registers that hold operands and re-
sults of arithmetic calculations or data manipulations. For some instructions, these two
accumulators are treated as a single double-byte (16-bit) accumulator called accumu-
lator D. Although most operations can use accumulators A or B interchangeably, the
following exceptions apply:
The ABX and ABY instructions add the contents of 8-bit accumulator B to the contents
of 16-bit register X or Y, but there are no equivalent instructions that use A instead of B.
The TAP and TPA instructions transfer data from accumulator A to the condition code
register, or from the condition code register to accumulator A, however there are no
equivalent instructions that use B rather than A.
The decimal adjust accumulator (DAA) instruction is used after binary-coded decimal
(BCD) arithmetic operations, but there is no equivalent BCD instruction to adjust ac-
cumulator B.
The add, subtract, and compare instructions associated with both A and B (ABA, SBA,
and CBA) only operate in one direction, making it important to plan ahead to ensure
the correct operand is in the correct accumulator.
3.1.2 Index Register X (IX)
The IX register provides a 16-bit indexing value that can be added to the 8-bit offset
provided in an instruction to create an effective address. The IX register can also be
used as a counter or as a temporary storage register.
3.1.3 Index Register Y (IY)
The 16-bit IY register performs an indexed mode function similar to that of the IX reg-
ister. However, most instructions using the IY register require an extra byte of machine
code and an extra cycle of execution time because of the way the opcode map is im-
plemented. Refer to 3.3 Opcodes and Operands for further information.
3.1.4 Stack Pointer (SP)
The M68HC11 CPU has an automatic program stack. This stack can be located any-
where in the address space and can be any size up to the amount of memory available
in the system. Normally the SP is initialized by one of the first instructions in an appli-
cation program. The stack is configured as a data structure that grows downward from
high memory to low memory. Each time a new byte is pushed onto the stack, the SP
is decremented. Each time a byte is pulled from the stack, the SP is incremented. At
any given time, the SP holds the 16-bit address of the next free location in the stack.
Figure 3-2 is a summary of SP operations.
相關PDF資料
PDF描述
MC68HC11D0CP2 8-BIT, MROM, 2 MHz, MICROCONTROLLER, PDIP40
MC68HC11D0CP2 8-BIT, MROM, 2 MHz, MICROCONTROLLER, PDIP40
MC68HC11D0CP 8-BIT, MICROCONTROLLER, PDIP40
MC68HC11L6CFU1 8-BIT, OTPROM, 1 MHz, MICROCONTROLLER, PQFP64
MC68HC16S2CPU25 16-BIT, 25.17 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
MC68HC11D0CFB2 制造商:Rochester Electronics LLC 功能描述:8BIT MCU,192 BYTES RAM - Bulk 制造商:Freescale Semiconductor 功能描述: 制造商:Motorola Inc 功能描述: 制造商:MOTOROLA 功能描述:
MC68HC11D0CFB3 制造商:Motorola Inc 功能描述: 制造商:MOTOROLA 功能描述:
MC68HC11D0CFB3R2 制造商:Rochester Electronics LLC 功能描述:- Bulk
MC68HC11D0CFBE2 功能描述:8位微控制器 -MCU 8B MCU 192 BYTES RAM RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
MC68HC11D0CFBE3 功能描述:8位微控制器 -MCU 8B MCU 192RAM 3 MHZ RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT