參數(shù)資料
型號: MC68HC05SB7
廠商: FREESCALE SEMICONDUCTOR INC
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28
封裝: MO-150, SSOP-28
文件頁數(shù): 92/170頁
文件大小: 2161K
代理商: MC68HC05SB7
GENERAL RELEASE SPECIFICATION
August 27, 1998
MOTOROLA
CENTRAL PROCESSING UNIT
MC68HC05SB7
3-2
REV 2.1
3.2
ACCUMULATOR (A)
The accumulator is a general purpose 8-bit register as shown in Figure 3-1. The
CPU uses the accumulator to hold operands and results of arithmetic calculations
or non-arithmetic operations. The accumulator is not affected by a reset of the
device.
3.3
INDEX REGISTER (X)
The index register shown in Figure 3-1 is an 8-bit register that can perform two
functions:
Indexed addressing
Temporary storage
In indexed addressing with no offset, the index register contains the low byte of
the operand address, and the high byte is assumed to be $00. In indexed
addressing with an 8-bit offset, the CPU nds the operand address by adding the
index register content to an 8-bit immediate value. In indexed addressing with a
16-bit offset, the CPU nds the operand address by adding the index register
content to a 16-bit immediate value.
The index register can also serve as an auxiliary accumulator for temporary
storage. The index register is not affected by a reset of the device.
3.4
STACK POINTER (SP)
The stack pointer shown in Figure 3-1 is a 16-bit register. In MCU devices with
memory space less than 64k-bytes the unimplemented upper address lines are
ignored. The stack pointer contains the address of the next free location on the
stack. During a reset or the reset stack pointer (RSP) instruction, the stack pointer
is set to $00FF. The stack pointer is then decremented as data is pushed onto the
stack and incremented as data is pulled off the stack.
When accessing memory, the ten most signicant bits are permanently set to
0000000011. The six least signicant register bits are appended to these ten xed
bits to produce an address within the range of $00FF to $00C0. Subroutines and
interrupts may use up to 64($C0) locations. If 64 locations are exceeded, the
stack pointer wraps around and overwrites the previously stored information. A
subroutine call occupies two locations on the stack and an interrupt uses ve
locations.
3.5
PROGRAM COUNTER (PC)
The program counter shown in Figure 3-1 is a 16-bit register. In MCU devices
with memory space less than 64k-bytes the unimplemented upper address lines
are ignored. The program counter contains the address of the next instruction or
operand to be fetched.
相關PDF資料
PDF描述
MC68HC705SB7 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PDSO28
MC68HC05SU3AB 8-BIT, MROM, 2 MHz, MICROCONTROLLER, PDIP42
MC68HC05T2P 8-BIT, MROM, MICROCONTROLLER, PDIP40
MC68HC08AS32CFN 8-BIT, EEPROM, 8.4 MHz, MICROCONTROLLER, PQCC52
MC68HC08AS32VFN 8-BIT, EEPROM, 8.4 MHz, MICROCONTROLLER, PQCC52
相關代理商/技術參數(shù)
參數(shù)描述
MC68HC05SC24 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:Secure 8-bit microcomputer with EEPROM
MC68HC05SR3 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:High-density Complementary Metal Oxide Semiconductor (HCMOS) Microcontroller Units
MC68HC05SU3A 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:Fully static chip design featuring the industry standard 8-bit M68HC05 core
MC68HC05T16 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor (HCMOS) microcontroller unit
MC68HC05V12 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontreller Unit