
European MCU Design Centre
MB91F467BA/466BA/465BA/464BA preliminary datasheet ver. 0.27
Page 2 of 125
Revision History
Version
Date
Remark
0.10
2005-09-01
Initial draft
0.11
2005-09-04
Memory map + flash memory map updated
0.12
2006-01-20
Addition of external bus interface option
0.13
2006-01-25
Corrections for external bus interface option;
Remove of package information: MB91F467BA will be delivered
in a QFP-144 package with pure Sn pin plating, the related
package number is to be defined
Use UART3 instead of UART2
0.14
2006-02-14
Upgrade tables and feature lists to refer to external bus interface
option
0.15
2006-02-16
Updated pinning, added 1 USART in non-external-bus mode,
exchanged WRX[1] against WRX[0]
0.16
2006-03-08
Changed pinning for 6ch CAN, 32ch ADC and NMI
0.17
2006-03-09
Corrected operation supply voltage range
0.18
2006-06-08
Delete
“ESD Protection” of Electrical Characteristics
Added condition of current consumption
0.19
2006-07-20
Add a postscript to
“function limitation” in “2.1.Overview Table”
Add the
“6. IO Map”
2006-07-25
1.1.Block Diagram change IO Voltage
2.2.1.Memory Map change
“not available area”
2.2.7.&2.2.8. correct memory capacity.
2.3. correct feature of
“Clock supervisor”
6. Add a postscript to
“function limitation”
Add a Cancellation line
“D/A Converter”,”Interrupt Control Unit”
and
“CAN 0-5 Status Flags”
2006-08-07
4. Added
“Type” in Table
6. Del a Cancellation line
”Interrupt Control Unit”
Add a Cancellation line Test function
(C-Unit Test,
“CSVCR(bit7)”,”CANCKD”and”I-Unit Test)
0.20
2006-08-08
6. Del a postscript(*4) It was already descripted
“User’s Manual”.
0.21
2007-03-12
Added MB91F465BA information
“A Cover” & 1 & 4.1 & 4.2.1 & 4.2.2 Add “MB91F465BA”
1.1 & 2.1 Add 544KB FLASH and explanation of FLASH
2.2.1
Add memory map of MB91F465BA
2.2.9
Add 544KB Fash memory map
6
Add Flash area of MB91F465BA
Changed a discription about Clock supervisor
2.3 Clock supervisor function revival
0.22
2007-04-09
Added
“4.3 I/O Pin Types”