參數資料
型號: MB90F474LPF
元件分類: 微控制器/微處理器
英文描述: 16-BIT, FLASH, 12 MHz, MICROCONTROLLER, PQFP100
封裝: PLASTIC, QFP-100
文件頁數: 101/118頁
文件大?。?/td> 1199K
代理商: MB90F474LPF
MB90470 Series
83
(Continued)
The value of the limiting resistance should be set so that when the +B signal is applied the input current to
the microcontroller pin does not exceed rated values, either instantaneously or for prolonged periods.
Note that when the microcontroller drive current is low, such as in the power saving modes, the +B input
potential may pass through the protective diode and increase the potential at the VCC pin, and this may affect
other devices.
Note that if a +B signal is input when the microcontroller power supply is off (not fixed at 0 V) , the power
supply is provided from the pins, so that incomplete operation may result.
Note that if the +B input is applied during power-on, the power supply is provided from the pins and the resulting
supply voltage may not be sufficient to operate the power-on reset.
Care must be taken not to leave the +B input pin open.
Sample recommended circuits:
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
P-ch
N-ch
Vcc
R
Input/output equivalent circuits
+B input (0 V to 16 V)
Limiting
resistance
Protective diode
相關PDF資料
PDF描述
MB90F483PFV 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP100
MB90F523BPFV 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP120
MB90522APFF 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP120
MB90523APFF 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP120
MB90522BPFV 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP120
相關代理商/技術參數
參數描述
MB90F474LPFR-GE1 制造商:FUJITSU 功能描述:
MB90F474LPMCR-GE1 制造商:FUJITSU 功能描述:
MB90F482PFR-GE1 制造商:FUJITSU 功能描述:
MB90F482PFR-G-JNE1 制造商:FUJITSU 功能描述:
MB90F482PMC-G-JNE1 制造商:FUJITSU 功能描述: