MB90330A Series
4
DS07-13734-9E
■ PRODUCT LINEUP
* : It is setting of Jumper switch (TOOL VCC) when Emulator (MB2147-01) is used. Please refer to the
MB2147-01 or MB2147-20 hardware manual (3.3 Emulator-dedicated Power Supply Switching) about details.
Part number
MB90V330A
MB90F334A
MB90F335A
MB90333A
Type
For evaluation
Built-in Flash
memory
Built-in Flash
memory
Built-in MASK
ROM
ROM capacity
No
384 Kbytes
512 Kbytes
256 Kbytes
RAM capacity
28 Kbytes
24 Kbytes
30 Kbytes
16 Kbytes
Emulator-specific power supply *
Yes
CPU functions
Number of basic instructions
: 351 instructions
Minimum instruction execution time : 41.7 ns/at oscillation of 6 MHz
(When 4 times are used : Machine clock
of 24 MHz)
Addressing type
: 23 types
Program Patch Function
: For 2 address pointers
Maximum memory space
: 16 Mbytes
Ports
I/O Ports (CMOS) 94 ports
UART
Equipped with full-duplex double buffer
Clock synchronous or asynchronous operation selectable
It can also be used for I/O serial
Built-in special baud-rate generator
Built-in 4 channels
16-bit reload timer
16-bit reload timer operation
Built-in 3 channels
Multi-functional timer
16-bit free run timer
× 1 channel
Output compare
× 4 channels
Input capture
× 4 channels
8/16-bit PPG timer (8-bit mode
× 6 channels, 16-bit mode × 3 channels)
16-bit PWC timer
× 1 channel
8/10-bit A/D converter
16 channels (input multiplex)
8-bit resolution or 10-bit resolution can be set.
Conversion time : 7.16
μs at minimum (24 MHz machine clock at maximum)
DTP/External interrupt
8 channels
Interrupt factor : “L”
→“H” edge/“H”→“L” edge/“L” level/“H” level selectable
I2C
3 channels
Extended I/O serial interface
1 channel
USB
1 channel
USB function (correspond to USB Full Speed)
USB HOST function
External bus interface
For multi-bus/non-multi-bus
Withstand voltage of 5 V
16 ports (excluding UTEST and I/O for I2C)
Low Power Consumption Mode
Sleep mode/Time-base timer mode/Stop mode/CPU intermittent mode/
Watch mode
Process
CMOS
Operating voltage
3.3 V
± 0.3 V (at maximum machine clock 24 MHz)