
MB90330 Series
4
■
PRODUCT LINEUP
* : It is setting of Jumper switch (TOOL VCC) when Emulator (MB2147-01) is used. Please refer to the
MB2147-01 or MB2147-20 hardware manual (3.3 Emulator-dedicated Power Supply Switching) about details.
Part number
MB90V330A
For evaluation
No
28 KB
Used bit
Number of basic instructions
Minimum instruction
execution time
MB90F334A
Built-in Flash memory
384 KB
24 KB
MB90333A
Built-in Mask ROM
256 KB
16 KB
Type
ROM capacity
RAM capacity
Emulator-specific power supply *
CPU functions
Addressing type
Program Patch Function
Maximum memory space
I/O Ports (CMOS) 94 ports
Equipped with full-duplex double buffer
Clock synchronous or asynchronous operation selectable
It can also be used for I/O serial
Built-in special baud-rate generator
Built-in 4 channels
16-bit reload timer operation
Built-in 3 channels
16-bit free run timer
×
1 channel
Output compare
×
4 channels
Input capture
×
4 channels
8/16-bit PPG timer (8-bit mode
×
6 channels, 16-bit mode
×
3 channels)
16-bit PWC timer
×
1 channel
16 channels (input multiplex)
8-bit resolution or 10-bit resolution can be set.
Conversion time : 7.16
μ
s at minimum (24 MHz machine clock at maximum)
8 channels
Interrupt factor : “L”
→
“H” edge/“H”
→
“L” edge/“L” level/“H” level selectable
3 channels
1 channel
1 channel
USB function (conform to USB2.0 Full Speed)
USB Mini-HOST function
For multi-bus/non-multi-bus
16 ports (excluding VBUS and I/O for I
2
C)
Sleep mode/Time-base timer mode/Stop mode/CPU intermittent mode/
Watch mode
CMOS
3.3 V
±
0.3 V (at maximum machine clock 24 MHz)
: 351 instructions
: 41.6 ns/at oscillation of 6 MHz
(When 4 times are used : Machine clock of
24 MHz)
: 23 types
: For 2 address pointers
: 16 MB
Ports
UART
16-bit reload timer
Multi-functional timer
8/10-bit A/D converter
DTP/External interrupt
I
2
C
I/O extended serial interface
USB
External bus interface
Withstand voltage of 5 V
Low Power Consumption Mode
Process
Operating voltage