參數資料
型號： MB89951PFM
元件分類： 微控制器/微處理器
英文描述： 8-BIT, MROM, 5 MHz, MICROCONTROLLER, PQFP64
封裝： 0.65 MM PITCH, QFP-64
文件頁數： 43/110頁
文件大?。?/td> 619K
代理商： MB89951PFM
HARDWARE CONFIGURATION
2– 23
P40 to P46:
CMOS type I/O ports
(also used as peripheral input and output)
Switching input and output
This port has a data-direction register (DDR) and a port-data register
(PDR) for each bit. Input and output can be set independently for each
bit. The pin with the DDR set to 1 is set to output, and the pin with the
DDR set to 0 is set to input. When the peripheral output bit is enabled,
these ports are set to output irrespective of the DDR setting conditions.
Operation for output port (DDR = 1)
The value written at the PDR is output to the pin where the DDR is set
to 1. When the PDR is read, usually, the value of the pin is read instead
of the contents of the output latch. However, when the Read Modify Write
instruction is executed, the contents of the output latch are read
irrespective of the DDR setting conditions. Therefore, the bit-processing
instruction can be used even if input and output are mixed with each
other. When data is written to the PDR, the written data is held in the
output latch irrespective of the DDR setting conditions.
Operation for input port (DDR = 0)
When used as the input port, the output impedance goes High.
Therefore, when the PDR is read, the value of the pin is read.
Peripheral output operation
When using as the peripheral output, setting is performed by the
peripheral output enable bit (See the description of each peripheral). The
peripheral output enable bit has priority in switching input and output.
Even if the output from each peripheral is enabled, the read value of the
port is effective, so the peripheral output value can be checked.
Peripheral input operation
The pin value at a port with the peripheral input function is always input
for the peripheral input irrespective of the setting of the DDR and
peripheral. Set the DDR to input when using an external signal for the
peripheral input.
State when reset
When reset, the DDR is initialized to 0 and the output impedance goes
High at all bits. When reset, the PDR is not initialized. Therefore, set
State in stop mode
With the SPL bit of the standby-control register set to 1, the output
impedance goes High in stop mode irrespective of the value of the DDR.
Peripherals
相關PDF資料
PDF描述
MB89T623PFM 8-BIT, 10 MHz, MICROCONTROLLER, PQFP64
MB89623RP-SH 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PDIP64
MB89625RPFV 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP64
MB89W627C-SH 8-BIT, UVPROM, 10 MHz, MICROCONTROLLER, CDIP64
MB89PV620CF 8-BIT, 10 MHz, MICROCONTROLLER, CQFP64
相關代理商/技術參數
參數描述
MB89953 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:8-bit Proprietary Microcontroller
MB89953PFM 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:8-bit Proprietary Microcontroller
MB8995X 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:8-bit Proprietary Microcontroller
MB89960 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:8-bit Proprietary Microcontroller
MB89965 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:8-bit Proprietary Microcontroller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*