參數資料
型號: M38B59MFH-P113FP
廠商: Mitsubishi Electric Corporation
英文描述: SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
中文描述: 單芯片8位CMOS微機
文件頁數: 31/69頁
文件大小: 1011K
代理商: M38B59MFH-P113FP
MITSUBISHI MICROCOMPUTERS
38B5 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
31
PRELIMINARY
Notice: This s not a final specification.
Some parametric imits are subject to change.
4. S
RDY1
output signal
The S
RDY1
output is a transmit/receive enable signal which informs
the serial transfer destination that transmit/receive is ready. In the
initial status, when the serial I/O initialization bit (b4) is reset to “0,”
the S
RDY1
output goes to “L” and the S
RDY1
output goes to “H”. After
transmitted data is stored in the serial I/O1 register (address 001B
16
)
and a transmit/receive operation becomes ready, the S
RDY1
output
goes to “H” and the S
RDY1
output goes to “L”. When a transmit/
receive operation is started and the transfer clock goes to “L”, the
S
RDY1
output goes to “L” and the S
RDY1
output goes to “H”.
5. S
RDY1
input signal
The S
RDY1
input signal becomes valid only when the S
RDY1
input
and the S
BUSY1
output are used. The S
RDY1
input is a signal for
receiving a transmit/receive ready completion signal from the serial
transfer destination.
When the internal synchronous clock is selected, input a low level
signal into the S
RDY1
input and a high level signal into the S
RDY1
input in the initial status in which the transfer is stopped.
When an “H” level signal is input into the S
RDY1
input and an “L”
level signal is input into the S
RDY1
input for a period of 1.5 cycles or
more of transfer clock, transfer clocks are output from the S
CLK1
output and a transmit/receive operation is started.
After the transmit/receive operation is started and an “L” level sig-
RDY1
input and an “H” level signal into the
_________
RDY1
input, this operation cannot be immediately stopped.
After the specified number of bits are transmitted and received, the
transfer clocks from the S
CLK1
output is stopped. The handshake
unit of the 8-bit serial I/O and that of the automatic transfer serial
I/O are of 8 bits.
When the external synchronous clock is selected, the S
RDY1
input
becomes one of the triggers to output the S
BUSY1
signal.
To start a transmit/receive operation (S
BUSY1
output: “L,” S
BUSY1
output: “H”), input an “H” level signal into the S
RDY1
input and an “L”
level signal into the S
RDY1
input, and also write transmit data into
the serial I/O1 register.
_________
Fig. 30 S
RDY1
Output Operation
Fig. 31 S
RDY1
Input Operation (internal synchronous clock)
S
RDY1
S
CLK1
Write to serial
I/O1 register
S
RDY1
S
CLK1
S
OUT1
相關PDF資料
PDF描述
M38B57MCH-P202FP RES,Carbon Film,51Ohms,350WV,5+/-% Tol
M38B57MCH-P218FP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38B57 SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38B53M4-059FP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38B53M4-060FP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
相關代理商/技術參數
參數描述
M38B79MFA053 制造商:Panasonic Industrial Company 功能描述:SUB ONLY IC
M38C13E6FP 功能描述:IC 740 MCU OTP 24K 64LQFP RoHS:否 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 產品培訓模塊:MCU Product Line Introduction XMEGA Introduction AVR XMEGA USB Connectivity 標準包裝:90 系列:AVR® XMEGA 核心處理器:AVR 芯體尺寸:8/16-位 速度:32MHz 連通性:I²C,IrDA,SPI,UART/USART 外圍設備:欠壓檢測/復位,DMA,POR,PWM,WDT 輸入/輸出數:50 程序存儲器容量:192KB(96K x 16) 程序存儲器類型:閃存 EEPROM 大小:4K x 8 RAM 容量:16K x 8 電壓 - 電源 (Vcc/Vdd):1.6 V ~ 3.6 V 數據轉換器:A/D 16x12b; D/A 2x12b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:64-TQFP 包裝:托盤 配用:ATSTK600-RC14-ND - STK600 SOCKET/ADAPTER 64TQFPATSTK600-TQFP64-ND - STK600 SOCKET/ADAPTER 64-TQFPATAVRONEKIT-ND - KIT AVR/AVR32 DEBUGGER/PROGRMMRATAVRISP2-ND - PROGRAMMER AVR IN SYSTEM
M38C13E6HP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38C13RLFS 制造商:Renesas Electronics Corporation 功能描述:EMULATION MCU/8BIT CMOS EMULATION CHIP - Bulk
M38C24M4-XXXFP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER