參數資料
型號： M34508G4H-XXXFP
元件分類： 微控制器/微處理器
英文描述： 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO20
封裝： 5.30 X12.60 MM, 1.27 MM PITCH, PLASTIC, SOP-20
文件頁數： 62/106頁
文件大小： 1059K
代理商： M34508G4H-XXXFP
4508 Group
Rev.1.03
2009.07.27
page 57 of 140
REJ03B0148-0103
Fig. 50 Switch to ceramic oscillation/RC oscillation
Fig. 51 Handling of XIN and XOUT when main clock is not used
Fig. 52 Ceramic resonator external circuit
Fig. 53 External RC circuit
Do not execute the CRCK
instruction in program.
Note: Externally connect a damping
resistor Rd depending on the
oscillation frequency.
(A feedback resistor is built-in.)
Use the resonator manu-
facturer’s recommended value
because constants such as ca-
pacitance depend on the
resonator.
(1) On-chip oscillator operation
After system is released from reset, the MCU starts operation by the
clock output from the on-chip oscillator which is the internal oscilla-
tor.
The clock frequency of the on-chip oscillator depends on the supply
voltage and the operation temperature range.
Be careful that variable frequencies when designing application
products.
(2) Main clock generating circuit (f(XIN))
The ceramic resonator or RC oscillation can be used for the main
clock of this product.
After system is released from reset, the ceramic oscillation is active
for main clock.
The ceramic oscillation is invalid and the RC oscillation circuit is
valid with the CRCK instruction.
Execute the CRCK instruction in the initial setting routine of program
(executing it in address 0 in page 0 is recommended).
The execution of the CRCK instruction can be valid only once.
Register MR controls the enable/disable of the oscillation and the
selection of the operation source clock.
Also, when the MCU operates only by the on-chip oscillator without
using main clock f(XIN), connect XIN pin to Vss and leave XOUT pin
open, and do not execute the CRCK instruction (Figure 51).
(3) Ceramic resonator
When the ceramic resonator is used as the main clock (f(XIN)), con-
nect the ceramic resonator and the external circuit to pins XIN and
XOUT at the shortest distance. A feedback resistor is built in between
pins XIN and XOUT (Figure 52).
Do not execute the CRCK instruction.
Set “0” to bit 0 of register MR after the oscillation stabilizing wait
time is generated by software to select the clock generated by the
ceramic oscillation circuit for the source oscillation clock.
(4) RC oscillation
When the RC oscillation is used as the main clock (f(XIN)), connect
the XIN pin to the external circuit of resistor R and the capacitor C at
the shortest distance and leave XOUT pin open. Then, execute the
CRCK instruction (Figure 53).
The frequency is affected by a capacitor, a resistor and a microcom-
puter. So, set the constants within the recommended operating
condition of the frequency limits.
*
Reset
CRCK instruction
Ceramic oscillation invalid
RC oscillation valid
Ceramic oscillation valid
RC oscillation invalid
Main clock f(XIN)
4508
XIN
XOUT
*
Do not execute the CRCK
instruction in program.
4508
XIN
XOUT
R
C
*
Execute the CRCK
instruction in program.
4508
XIN
XOUT
Rd
CIN
COUT
相關PDF資料
PDF描述
M34508G4-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO20
M34508G4HGP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO20
M34508G4FP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO20
M34518M2-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP32
M34518M4-XXXSP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDIP32
相關代理商/技術參數
參數描述
M34508G4H-XXXGP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34508G4-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34508G4-XXXGP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34509G4FP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34509G4HFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*