參數資料
型號： M34508G4H-XXXFP
元件分類： 微控制器/微處理器
英文描述： 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO20
封裝： 5.30 X12.60 MM, 1.27 MM PITCH, PLASTIC, SOP-20
文件頁數： 48/106頁
文件大?。?/td> 1059K
代理商： M34508G4H-XXXFP
Rev.1.03
2009.07.27
page 44 of 140
REJ03B0148-0103
4508 Group
D7 D6 D5 D4 D3 D2 D1 D0
At transmit (D7–D0: transfer data)
At receive
D7 D6 D5 D4 D3 D2 D1 D0
SIN pin
SOUT pin
SIN pin
Serial interface register (SI)
D7 D6 D5 D4 D3 D2 D1 D0
*
D7 D6 D5 D4 D3 D2 D1
D7 D6 D5 D4 D3 D2
D0
D1 D0
Transfer data set
Transfer start
Transfer complete
*
** * * * * *
** * * ** **
** * * * * *
** ** **
Fig. 37 Serial interface register state when transferring
(1) Serial interface register SI
Serial interface register SI is the 8-bit data transfer serial/parallel
conversion register. Data can be set to register SI through registers
A and B with the TSIAB instruction. The contents of register A is
transmitted to the low-order 4 bits of register SI, and the contents
of register B is transmitted to the high-order 4 bits of register SI.
During transmission, each bit data is transmitted LSB first from the
lowermost bit (bit 0) of register SI, and during reception, each bit
data is received LSB first to register SI starting from the topmost bit
(bit 7).
When register SI is used as a work register without using serial in-
terface, do not select the SCK pin.
(2) Serial interface transmit/receive
completion flag (SIOF)
Serial interface transmit/receive completion flag (SIOF) is set to “1”
when serial data transmission or reception completes. The state of
SIOF flag can be examined with the skip instruction (SNZSI). Use
the interrupt control register V2 to select the interrupt or the skip
instruction.
The SIOF flag is cleared to “0” when the interrupt occurs or when
the next instruction is skipped with the skip instruction.
(3) Serial interface start instruction (SST)
When the SST instruction is executed, the SIOF flag is cleared to
“0” and then serial interface transmission/reception is started.
(4) Serial interface control register J1
Register J1 controls the synchronous clock, P02/SCK, P01/SOUT
and P00/SIN pin function. Set the contents of this register through
register A with the TJ1A instruction. The TAJ1 instruction can be
used to transfer the contents of register J1 to register A.
相關PDF資料
PDF描述
M34508G4-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO20
M34508G4HGP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO20
M34508G4FP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO20
M34518M2-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP32
M34518M4-XXXSP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDIP32
相關代理商/技術參數
參數描述
M34508G4H-XXXGP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34508G4-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34508G4-XXXGP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34509G4FP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34509G4HFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*