LXT361
—
Integrated T1/E1 LH/SH Transceiver for DS1/DSX-1 or PRI Applications
36
Datasheet
6.0
Test Specifications
Note:
Table 23
through
Table 34
and
Figure 12
through
Figure 21
represent the performance
specifications of the LXT361 and are guaranteed by test except, where noted, by design. The
minimum and maximum values listed in
Table 25
through
Table 34
are guaranteed over the
recommended operating conditions specified in
Table 24
.
Table 23. Absolute Maximum Ratings
Parameter
Sym
Min
Max
Unit
DC supply (reference to GND)
V
CC
, TV
CC
–
6.0
V
Input voltage, any pin
1
V
IN
GND - 0.3 V
V
CC
+ 0.3 V
V
Input current, any pin
2
I
IN
- 10
10
mA
Storage Temperature
T
STG
-65
150
°
C
Caution:
Exceeding these values may cause permanent damage.
Caution:
Functional operation under these conditions is not implied.
Caution:
Exposure to maximum rating conditions for extended periods may affect device reliability.
1. TVCC and VCC must not differ by more than 0.3 V during operation. TGND and GND must not differ by more than 0.3 V
during operation.
2. Transient currents of up to 100 mA will not cause SCR latch-up. TTIP, TRING, TVCC, and TGND can withstand continuous
currents of up to 100 mA.
Table 24. Recommended Operating Conditions
Parameter
Sym
Min
Typ
1
Max
Unit
Test Conditions
DC supply
2
V
CC
, TV
CC
4.75
5.0
5.25
V
Ambient operating temperature
T
-40
–
85
°
C
1. Typical figures are at 25
°
C and are for design aid only; not guaranteed and not subject to production testing.
2. TVCC and VCC must not differ by more than 0.3 V.
3. Power dissipation while driving 100
load coupled through 1:1.15 transformer and 0
resistor on TTIP/TRING. Includes
power dissipation on device and load. Digital levels are within 10% of the supply rails and digital outputs driving a 50 pF
capacity load.
4. Power dissipation while driving 100
load coupled through 1:2 transformer and 9.1
resistor on TTIP/TRING. Includes
power dissipation on device and load. Digital levels are within 10% of the supply rails and digital outputs driving a 50 pF
capacity load. This implementation has better return loss performance and is less sensitive to changes in impedances
variations.
5. Power dissipation while driving 120
load coupled through 1:2 transformer and 9.1
resistor on TTIP/TRING. Includes
power dissipation on device and load. Digital levels are within 10% of the supply rails and digital outputs driving a 50 pF
capacity load.